+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Peugeot 307 SW 1.6HDI EGR off (/showthread.php?tid=30031)
Peugeot 307 SW 1.6HDI EGR off - bekiyu - 19-11-2017
Hi mates,
I need egr off on Peugeot 307SW 1.6 HDi Bosch EDC 16C34,
I remove the egr with software "ADS EGR remover 2017/05 //Peugeot/EDC16C34_Type2//", and correct the cheksum with WinOLS 2.24.
If you can please check my solution for removing and the checksum. if it is wrong please correct it.
Peugeot 307SW 1.6 HDI
Bosch EDC 16C34
SW:9666820280
HW:9653958980
9664257580
read with Kess V2 5.017
Thanks,
RE: Peugeot 307 SW 1.6HDI EGR off - gaizkav8 - 20-11-2017
Hi. Your solution its not 100% ok. in some case runs good
With my solution you can unplug
Good luck
EDC16C34 _ECU_error_after_flashing - bekiyu - 22-11-2017
Hi members,
Peugeot 307 SW 1.6 HDi, 2007
EDC16C34
0281 013 332
1039S18944
softwar 1037398210
After writing mod file (EGR OFF) over OBD, the ECU is locked, and dont have posiibility to connect to ecu with DIAGBOX, flash tools KESS V2 or with Galleto.Car dont strat..
Before reading/writing over OBD I don´t make full BDM backup...
OBD reading/writing was ok without problem, during the flashing the car was connected to stable power supply 13.5V .
After flashing and finding this wake up error i remove ECU, and on the bench i can connect and read ecu over BDM with Galleto.
In attachment is eeprom file (edc16c34 eeprom.rar)
external flash file (edc16c34 ext flash M58BW016DB.rar )
and file readed over obd (p307 1,6hdi bosch edc 16c3 orig via OBD.ra)
Can you help plz?
Thanks