+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: F01 F10 F30 used TMS Coding (/showthread.php?tid=30555)
Pages:
1
2
F01 F10 F30 used TMS Coding - kklobo - 05-12-2017
I replace Headlight old was broken on accident and there is no old tms
Another headlight comes with used Tms Lamps is led technology
In ista D i got error that say "wrong coding index" "wrong version installed"
When calculate test plan in ista they said to code tms and teach in led indicator but not doing thib because "there is less than 11V connect charger procedure will not continue " but i'm using voltage regulator for ista d(always 14V) and lamp got proper voltage.
In esys i dont have green mark and no cafd file on right tms module
but on left i got cafd and green mark
can you tell me what i'm doing wrong?
car f07 740i usa model tms3 i think build date 11.2014
RE: F01 F10 F30 used TMS Coding - lynxbmw - 05-12-2017
(05-12-2017, 21:31 PM)kklobo Wrote: I replace Headlight old was broken on accident and there is no old tms
Another headlight comes with used Tms Lamps is led technology
In ista D i got error that say "wrong coding index" "wrong version installed"
When calculate test plan in ista they said to code tms and teach in led indicator but not doing thib because "there is less than 11V connect charger procedure will not continue " but i'm using voltage regulator for ista d(always 14V) and lamp got proper voltage.
In esys i dont have green mark and no cafd file on right tms module
but on left i got cafd and green mark
can you tell me what i'm doing wrong?
car f07 740i usa model tms3 i think build date 11.2014
Inject cafd by pressing "Detect CAF for SME", then Code and then teach LED in ISTA.
F01 F10 F30 used TMS Coding - kmodel99 - 06-12-2017
As above said, in esys do a inject cafd, “Detect CAF” in coding window, then choose latest file, press ok, then click Code.
Sent from my iPhone using Tapatalk
RE: F01 F10 F30 used TMS Coding - Almaretto - 06-12-2017
(06-12-2017, 08:25 AM)kmodel99 Wrote: As above said, in esys do a inject cafd, “Detect CAF” in coding window, then choose latest file, press ok, then click Code.
Sent from my iPhone using Tapatalk
Yes. If CAFD is missing, then you can first try injecting. Then, if that fails, program.
RE: F01 F10 F30 used TMS Coding - bmw335coding - 06-12-2017
Easyest way is with ISTA-P. They detect the two TMS, program and code it.
Try to code FEM_BODY/BDC/CAS first, so both TMS modues will coded/init automaticly.
When it doesn't help, try to inject CAFD with Esys like kmodell9 and Almaretto says.
RE: F01 F10 F30 used TMS Coding - kklobo - 07-12-2017
Detect caf is greyed it cannot by clicked
RE: F01 F10 F30 used TMS Coding - lynxbmw - 07-12-2017
(07-12-2017, 08:12 AM)kklobo Wrote: Detect caf is greyed it cannot by clicked
Read ECU and click on the TMS with no cafd, it will become active.
RE: F01 F10 F30 used TMS Coding - kklobo - 07-12-2017
I got i step not available and also greyed out only load is clicable
RE: F01 F10 F30 used TMS Coding - Almaretto - 07-12-2017
(07-12-2017, 08:12 AM)kklobo Wrote: Detect caf is greyed it cannot by clicked
Means you are likely using E-sys 3.28, which has KISWB error. You must update or downgrade if you wish to use that function.
RE: F01 F10 F30 used TMS Coding - kklobo - 07-12-2017
I deleted psddata folder and replace with correct files detect caf is now working I code frm cas and tms l tms r and still got less than 11v on Ista