+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: IMMO RENAULT SAGEM SAFIR 2 (/showthread.php?tid=30763)
IMMO RENAULT SAGEM SAFIR 2 - MIKAS - 13-12-2017
Hi all, who have file for swap immo on Sagem safir 2.
thank at all
RE: IMMO RENAULT SAGEM SAFIR 2 - raffy haddad - 13-12-2017
Hello
What do you mean by swap immo ?
You try to swap tms to another ecu
Regards
RE: IMMO RENAULT SAGEM SAFIR 2 - MIKAS - 13-12-2017
(13-12-2017, 15:00 PM)raffy haddad Wrote: Hello
What do you mean by swap immo ?
You try to swap tms to another ecu
Regards
imm dec 3 get file to replace on 28F and flash tms, name about file is swap file but file is corrupted
RE: IMMO RENAULT SAGEM SAFIR 2 - volavka - 14-12-2017
Follow this instruction then you will have working immo off
1. Cut immo line
2. Solder wire on pin 22 of mcu 28F512
3. connect ECU to car and connect wire to earth (-B)
4. Ignition ON for 5- 10 sec then ignition off
5. Unsolder the wire
. Car should start now
Good luck
RE: IMMO RENAULT SAGEM SAFIR 2 - marcel cirozz - 14-12-2017
This solution is ok, but I prefer using a julie emulator.
this method makes the ecu virgin, if you cut immo wire you stay immo off, if you don't cut it the ecu recodes himself and immo on.
Once the car started, youcan remove the emulator and reuse it.