+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Fiat - Alfa Romeo (https://cartechnology.co.uk/forumdisplay.php?fid=82)
+---- Thread: Multiecuscan 3.9R1 Latest ver. (/showthread.php?tid=30774)
Multiecuscan 3.9R1 Latest ver. - mikroel - 13-12-2017
Here is patch for latest ver. of Multiecuscan 3.9R1
For everybody who has some problems with Multiecuscan
Pay attention on this warning from official web site!!!!!!!!!!!!!!!
ELM 327 INTERFACE WARNING:
Please note that some ELM 327 interfaces produced in the last few years have problems accessing the CAN network.
[b]Multiecuscan works fine on Windows 7,8, 8.1 and Windows 10!
Bluetooth OBDKey, ELM 327 and OBDLink interfaces are fully supported but not recommended for special functions (like PROXI Alignment, remote control programming, IMA coding, etc.)!
[attachment=59908]
pass on PM
PM (Private Message) for password, do NOT post in thread for it, it will be removed.
Thanks, Admin.
Thanks, Admin.
RE: Multiecuscan 3.9R1 Latest ver. - giaguarom - 21-02-2018
Hello, someone tried this version for cars on can-line? Previous versions dont work, example for reset service on fiat 500 l or x, etc...work well only version 3.6
RE: Multiecuscan 3.9R1 Latest ver. - bogmarserwis - 23-02-2018
TODAY I TESTED IN DUCATO I HAVE THIS VERSION FROM ANOTHER PAGE BUT IT WORKS OK
RE: Multiecuscan 3.9R1 Latest ver. - giaguarom - 24-02-2018
On which model Ducato tested? Because the problem is on can-line for functions reset service or proxy alignment, example
RE: Multiecuscan 3.9R1 Latest ver. - bazare - 04-03-2018
Working on abritus as elm327 simulator? anyone tested?
RE: Multiecuscan 3.9R1 Latest ver. - mattydr67 - 04-03-2018
Original software works using kkl and elm emulator for AVDI
I think it will works for you using this crack too.
Good luck