Problem Ista with K+Dcan - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Car Technology Motorbikes Forums (https://cartechnology.co.uk/forumdisplay.php?fid=23) +--- Forum: Motorbikes Hardware & Tools (https://cartechnology.co.uk/forumdisplay.php?fid=38) +--- Thread: Problem Ista with K+Dcan (/showthread.php?tid=30888)

Problem Ista with K+Dcan - heinid - 16-12-2017 Hi there, maybe it's the wrong subforum but i'm posting it here. I have K+Dcan cable and it works like a charm with my r1200s and obd to 10 pin adapter from china. I even programmed it to Ilevel 2015. But after reinstallation of win it recognises my bike just sometimes. i have to connect via tool32 a several times to find my bike. then the connection is stable for at least a few minutes. if i have luck it's stable as long as i identify it via ista d. in ista p there's no chance to connect to the bike. with cars i don't have that problem (always stable). tried to downgrade ftdi driver but the problem this occurs. i have two obd-10pin cable, but problem is with both. does anyone have an idea how to solve it ? thx RE: Problem Ista with K+Dcan - egyclick - 16-12-2017 Hello, set the cable in Device manager to Latency1 instead of Latency16 RE: Problem Ista with K+Dcan - heinid - 16-12-2017 Hi, checked multiple times that is set to 1 ms RE: Problem Ista with K+Dcan - Silva1337 - 16-12-2017 Try to change port number RE: Problem Ista with K+Dcan - egyclick - 16-12-2017 Hello, then use the KDCAN utility in the first minute that the cable is connected to usb and OBD in order to set the cable to the correct speed: see which speed is needed for your bike, usually for cars built starting with march 2007 it's needed to have it set to 500Kbits. good luck! RE: Problem Ista with K+Dcan - heinid - 17-12-2017 Thanks for the hint, but i tried k+dcan utility already with no sucess bike is from 3/06 RE: Problem Ista with K+Dcan - egyclick - 17-12-2017 In that case you don't need the kdcan utility, just the cable requires pins 7&8 bridged together. you should try on a different pc or a car to see how it goes. cheers! RE: Problem Ista with K+Dcan - heinid - 25-12-2017 Unfortunatly no success with pin 7/8 bridge adapter... RE: Problem Ista with K+Dcan - Bimmer540 - 21-01-2018 Does Ista-p works on BMW K1600 GTL Exclu 2014 with K+Dcan cable and obd to 10 pin adapter from china for programming. RE: Problem Ista with K+Dcan - heinid - 16-02-2018 Update: no problems with istad k+dcan and win7 problem mentioned before was with win10 thx anyway [/i]