+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Problem urgently bsi citroen c3 (/showthread.php?tid=31602)
Problem urgently bsi citroen c3 - meccano85 - 12-01-2018
Hello,
I have a problem with the bsi of a citroen c3 9664983280 with eprom 95160
practically it broke a pin to the eprom and I made a weld on the needle that you see but unfortunately there is no way to be able to read it
can you make a virgin on the bsi in question ??
Thanks in advance
RE: Problem urgently bsi citroen c3 - CHIKODIAG - 13-01-2018
HI
your bsi is valio are it have 24C128 NOT 95160 ?????
GOOD LUCK
RE: Problem urgently bsi citroen c3 - zmann - 14-01-2018
(13-01-2018, 20:11 PM)CHIKODIAG Wrote: HI
your bsi is valio are it have 24C128 NOT 95160 ?????
GOOD LUCK
Hi, this C3 is pre-full CAN and yes, it's Siemens with 95160
Virgin from 206 BSI can be used !
RE: Problem urgently bsi citroen c3 - M83 - 14-01-2018
I put the eeprom 95160 all FF and program with Lexia.
if you carry edc16, you can remove the Pin code
regards
RE: Problem urgently bsi citroen c3 - CHIKODIAG - 14-01-2018
HI OK SO YOUR VIRGIN FILE
GOOD LUCK
RE: Problem urgently bsi citroen c3 - meccano85 - 15-01-2018
Thks all tomorrow i try
RE: Problem urgently bsi citroen c3 - adel.nooh - 15-01-2018
(15-01-2018, 02:14 AM)meccano85 Wrote: Thks all tomorrow i try
After write this virgin file to eeprom, solder it and install bsi to car.
First thing you have to write vin in bsi then you can do key learning and all bsi configurations.