NOOB : Odis Engineering for Diag and Coding ? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: NOOB : Odis Engineering for Diag and Coding ? (/showthread.php?tid=31924) |
NOOB : Odis Engineering for Diag and Coding ? - bmwcoder75 - 21-01-2018 Hi VAG noob here. I am looking at doing VAG diags and coding (Video in motion etc) on all brands Audi, Porsche, Lambo, Bentley etc. Not interested in updating ECU on those cars. Am I right in assuming ODIS Engineering can do those things? Seems to be a lot of different interfaces too, which I am confused about Any reliable clone interface I could use. If you have reasonable commercial solutions feel free to PM me. Thanks RE: NOOB : Odis Engineering for Diag and Coding ? - Guss - 21-01-2018 VAG can pro only can do this RE: NOOB : Odis Engineering for Diag and Coding ? - sixcode - 21-01-2018 (21-01-2018, 19:40 PM)Guss Wrote: VAG can pro only can do this yep but not for Porsche, Lambo, Bentley i think also you need extra lic. for this one IF you buy a ori one RE: NOOB : Odis Engineering for Diag and Coding ? - Guss - 21-01-2018 (21-01-2018, 19:59 PM)sixcode Wrote:(21-01-2018, 19:40 PM)Guss Wrote: VAG can pro only can do this I'm not sure about Lambo, Bentley and Porsche if VAG Can Pro can do it but the best to ask the original supplier for these features RE: NOOB : Odis Engineering for Diag and Coding ? - kwork - 22-01-2018 (21-01-2018, 19:59 PM)sixcode Wrote:(21-01-2018, 19:40 PM)Guss Wrote: VAG can pro only can do this I had success to VIM for use VCP VIM manager for 2017 Porsche 718 Boxter and 2017 Bentley Flyingspur. |