+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Solved ✔ Fiat ecu 6f3 clear crash data? (/showthread.php?tid=31945)
Pages:
1
2
Fiat ecu 6f3 clear crash data? - victorysatgr - 22-01-2018
Hello
i have be stuck with a fiat grande punto 1.3 mtj 75 hp, the original ecu is not working, i replace it with another(first i make it virgin with zedfull) but i have noFPS on dash (fire protection in crash).
It is possible that ecu has storing crash data? the engine is very difficult to start...
and i have no immo light on dash....
If i upload all ecu data (taking by galletto on bench) it is possible someone clear that crash?
do i need clear dump file?
Thank you.
RE: Fiat ecu 6f3 clear crash data? - Dash_Burner - 22-01-2018
(22-01-2018, 17:58 PM)victorysatgr Wrote: Hello
i have be stuck with a fiat grande punto 1.3 mtj 75 hp, the original ecu is not working, i replace it with another(first i make it virgin with zedfull) but i have noFPS on dash (fire protection in crash).
It is possible that ecu has storing crash data? the engine is very difficult to start...
and i have no immo light on dash....
If i upload all ecu data (taking by galletto on bench) it is possible someone clear that crash?
do i need clear dump file?
Thank you.
Try disconect-reconect battery and maybe do proxy alligment prosedure. If problem exists maybe is bad way of virginizing. send file and we will do it for you.
RE: Fiat ecu 6f3 clear crash data? - victorysatgr - 23-01-2018
Here is all file from ecu
i quess the crush data is in the epprom?
can you make the ecu virgin please? and crush data clean please?
thank you.
RE: Fiat ecu 6f3 clear crash data? - darek_naprawa - 23-01-2018
Try it eprom cleared.
RE: Fiat ecu 6f3 clear crash data? - tigre - 23-01-2018
Hi, i have same problem, "NoFPS" on dash, i have try this eeprom and still same error
RE: Fiat ecu 6f3 clear crash data? - victorysatgr - 23-01-2018
I have use that epprom repair, is not working......
what other may cause the noFSP?
RE: Fiat ecu 6f3 clear crash data? - Dash_Burner - 23-01-2018
(23-01-2018, 11:11 AM)victorysatgr Wrote: I have use that epprom repair, is not working......
what other may cause the noFSP?
1.Write modified file to car.
2. After succesfull writing turn ignition off for more than 10 seconds.
3. Remove key from ignition.
4. Lock-unlock car and turn it on. See if problem excists. I met this problem many times in the past and solved like this. Usually it hapens after trying to read or write ecu eeprom. What tool do you use to write this ?
noFsp can be caused because of can bus temporari block.
RE: Fiat ecu 6f3 clear crash data? - victorysatgr - 23-01-2018
(23-01-2018, 21:21 PM)Dash_Burner Wrote:(23-01-2018, 11:11 AM)victorysatgr Wrote: I have use that epprom repair, is not working......
what other may cause the noFSP?
1.Write modified file to car.
2. After succesfull writing turn ignition off for more than 10 seconds.
3. Remove key from ignition.
4. Lock-unlock car and turn it on. See if problem excists. I met this problem many times in the past and solved like this. Usually it hapens after trying to read or write ecu eeprom. What tool do you use to write this ?
noFsp can be caused because of can bus temporary block.
first at all thank you for your support..
i use galletto v54 (good quality clone)
i write the epprom yesterday,(exactly the same that you have send to me) the car lock-unlocks many times...the same
symptoms.. i use that ecu & bsi to another car and still have the same...
how can i unblock the can?
RE: Fiat ecu 6f3 clear crash data? - tommaxx - 24-01-2018
First clear airbag sensor.
RE: Fiat ecu 6f3 clear crash data? - tigre - 25-01-2018
Airbag is no faults but still "NOFPS" on dash