+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: E-sys ICOM connection issue (/showthread.php?tid=33165)
E-sys ICOM connection issue - Spirit5676 - 28-02-2018
Hi,
I'm trying to trouble shoot the issue with my ICOM A2 clone. I found out that I can't connect with ICOM to F-series. I get the following error:
"Connection check failed.
Gateway/ECUs are not correctly connected or not responding.
However Functions using the ODX-Data can be used. [G188]"
I've tried F30 and F10. If I use ENET cable esys works fine. I've locked ICOM with Itoolradal. I'm using E-sys 3.31.0, with token master laucher pro 3.0.4.90 sp-daten 63.3. In ediabas.ini:
Under TCP:
Interface= REMOTE
Remotehost = 169.254.92.38
Port = 6801
Under Xethernet
Interface= REMOTE
Remotehost = 169.254.92.38
DiagnosticPort = 6801
Itoolradar and ISTA+ both show the IP: 169.254.92.38. Windows 10x64, windows firewall off and windows defender turned off. Wlan disabled. ICOM works with INPA, NCS Expert, Winkpf. With ISTA+ I can read codes from F-series, software update isn't working.
RE: E-sys ICOM connection issue - kmodel99 - 28-02-2018
Try update firmware of your ICOM. I have problem with G series which was solved by update.
RE: E-sys ICOM connection issue - Spirit5676 - 28-02-2018
(28-02-2018, 14:13 PM)kmodel99 Wrote: Try update firmware of your ICOM. I have problem with G series which was solved by update.
ICOM has the latest Firmware 3.15.02 currently. I'm gonna try another laptop. I don't a another to ICOM to test.
RE: E-sys ICOM connection issue - user_530d - 28-02-2018
You don't need ediabas.ini configuration.
Use in e-sys connection-manager ICOM/Ethernet with tcp://169.254.92.38:50160
See screenshot, use your ip.
Edit: Sorry, german screenshot.
(28-02-2018, 14:46 PM)Spirit5676 Wrote:(28-02-2018, 14:13 PM)kmodel99 Wrote: Try update firmware of your ICOM. I have problem with G series which was solved by update.
ICOM has the latest Firmware 3.15.02 currently. I'm gonna try another laptop. I don't a another to ICOM to test.
RE: E-sys ICOM connection issue - Spirit5676 - 28-02-2018
I need ediabas, because I'm using INPA etc.
Anyways installing software on different laptop solved the issue. I installed both laptops just the same, so I'm not sure what the issue is with the other laptop.
RE: E-sys ICOM connection issue - Abou Jambo - 01-02-2019
(28-02-2018, 16:31 PM)user_530d Wrote: You don't need ediabas.ini configuration.
Use in e-sys connection-manager ICOM/Ethernet with tcp://169.254.92.38:50160
See screenshot, use your ip.
Edit: Sorry, german screenshot.
(28-02-2018, 14:46 PM)Spirit5676 Wrote:(28-02-2018, 14:13 PM)kmodel99 Wrote: Try update firmware of your ICOM. I have problem with G series which was solved by update.
ICOM has the latest Firmware 3.15.02 currently. I'm gonna try another laptop. I don't a another to ICOM to test.
Any solution to connect E-SYS wireless? Laptop to router via lan cable and router to icom wireless ISTA+ works ok but E-SYS does not connect thank you