ZGW flash need help - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ZGW flash need help (/showthread.php?tid=33233) |
ZGW flash need help - muskatas - 02-03-2018 Hello, I need help. Want to flash ZGW02 high to ZGW 4sk or 8sk software for NBT retrofit. Car is F10 2010/09. What I did: Esys 3.27.1. Connection via ICOM/Ethernet->TAL-Calculating->Read FA->Save FA-> modifie FA (removed VO that dont fit to NBT)->Change zeitkriterium 0712->Read SVT->save svt_ist->i-step shipment F010-12-07-5xx and calculate svt->save svt_soll After last step I should see NBT and ZGW02 in my flash list, but I dont and cannot continue. Whats wrong in my steps? BTW steps has been done with oem ZGW01 but it should not matter because its only manipulation of software. RE: ZGW flash need help - lynxbmw - 02-03-2018 It does matter because ZGW01 must first be converted to zgw02 and then flashed with 4sk. RE: ZGW flash need help - muskatas - 02-03-2018 (02-03-2018, 10:54 AM)lynxbmw Wrote: It does matter because ZGW01 must first be converted to zgw02 and then flashed with 4sk.I have bought ZGW02 high that I am going to convert. I simply have been doing calculations to get know SWFL, then change zgw01 to zgw02, manualy edit svt xml and flash for 4sk or 8sk. |