Icom a2 cannot run esys need help - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Workshop Manuals (https://cartechnology.co.uk/forumdisplay.php?fid=20) +--- Thread: Icom a2 cannot run esys need help (/showthread.php?tid=33704)

Icom a2 cannot run esys need help - chong5195 - 14-03-2018 Hi guy..i has problem about icom a2 problem...icom a2 working well in ista+or ista-p... But i try using esys cannot connect...i try 3day aready..i don no what is problem..ista ip is showing 169.254.191.158. Itool radar showing ip is 169.254.191.158. Same with ista and itool radar...if i use easy connect is showing. 169.254.92.38. Is diffrent with ista and itool radar..i try both ip is same cannot connect......any idea ..can help??...ista..can run both ip...what i need to do pls Sent from my vivo 1713 using Tapatalk RE: Icom a2 cannot run esys need help - willisodhiambo - 28-09-2018 My friend, you ICOM has no ethernet as you can see in ISTA. Are you sure it is working well with ISTA+? Can you program? If you can the Esys will connect without issues. Reserve ICOM for Esys with itool radar. Share your Esys connection setup and ICOM configuration page for connections. Two prerequisites, Ethernet must be working on the ICOM and Gateway and secondly ICOM must be reserved RE: Icom a2 cannot run esys need help - Enabled - 28-09-2018 Weird, I never reserve my ICOM (genuine) for esys, and it works fine. I have seen an ICOM that must always be reserved for esys to work. RE: Icom a2 cannot run esys need help - chong5195 - 29-09-2018 icom work find.