+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: BMW mini 2003 dashboard pinout for xprog (/showthread.php?tid=34054)
BMW mini 2003 dashboard pinout for xprog - krug - 24-03-2018
As above looking for pinout connection to read mcu mask 0K50E with xprog. Maybe some 1 have or done it before. Have attached pics
Thanks in advance.
RE: BMW mini 2003 dashboard pinout for xprog - Enabled - 24-03-2018
MC68HC912DC128 mask 0K50E :
Pin 12 of MCU is Vdd (+5V),
Pin 14 Vss (Ground),
Pin 23 is BKGD (communication),
pin 46 is reset.
It looks like you can trace leads and solder to the through-holes just fine.
RE: BMW mini 2003 dashboard pinout for xprog - rs@chip - 24-03-2018
(24-03-2018, 14:19 PM)krug Wrote: As above looking for pinout connection to read mcu mask 0K50E with xprog. Maybe some 1 have or done it before. Have attached pics
Thanks in advance.
I sugest you to desolder procesor becouse you have 50/50 chance to kill that dash with xprog..good luck
