Function not available on this ECU - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56) +---- Thread: Function not available on this ECU (/showthread.php?tid=34208) |
Function not available on this ECU - DeeTurbo - 28-03-2018 Hi all I'm new to the site but I've been using PP2000 since 2011 on my Peugeot 306 HDI and it's been a great tool helping me with lots. I've not updated the software since I first installed it so it's at V5.02. I have now bought a DS3 and today I decided to replace the RD4 unit with a RD45 for it's Bluetooth functions. The unit was from a 2014 model and mine is a 2011. I plumbed it all in and fired up lexia to code the VIN to my car and I found that I got the above error. I've heard of a work round of installing the RD45 in to a newer car and updating the VIN there then moving it to my car, unfortunately this isn't an option I can go down. I've read I need to update to V7.02 and patch up to V7.78 to get around my issue but I've also read I need to make sure the cable unit it up to Revision C but I have no idea how to check it's revision, some help with this would be great. Do you think I need to replace the cable and update the cable or could I get away with just a software update? RE: Function not available on this ECU - jure5j - 30-03-2018 (28-03-2018, 19:54 PM)DeeTurbo Wrote: Hi all You need to update the firmware of the Lexia cable.Install PSA interface checker connect Lexia and you will see which version of firmware you have. |