E39: LCM change vin tool32 ? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: E39: LCM change vin tool32 ? (/showthread.php?tid=34283) |
E39: LCM change vin tool32 ? - Fx82 - 30-03-2018 On a '97 E39 the lcm has been replaced. It now needs a correction on the vin and mileage. Is this possible with tool32? I don't have BMW Scanner and not planning to buy it for 1 time use. Is it possible to connect the lcm on the bench? RE: E39: LCM change vin tool32 ? - samsam112 - 30-03-2018 It might be possible but for how long it would take to find out I would just spend the $8.50 on BMW Scanner. Oh and you can connect to it on the bench but you need the dash to act as a gateway/protocol converter RE: E39: LCM change vin tool32 ? - Fx82 - 31-03-2018 For the lcm and cluster I only need to connect + and - and a wire which connects to the cluster? How do I connect both to the obd port? RE: E39: LCM change vin tool32 ? - E60 - 31-03-2018 You need to connect + and - from cluster and lcm. If you use High cluster, then connect cluster K-line to obd pin 7. LCM i-bus take from cluster. RE: E39: LCM change vin tool32 ? - Vojno - 31-03-2018 If you want to connect on bench, you can only connect for LCM if you have OBD interface! Because you can switch the normal OBD interface to K-BUS interface. On the obd.ini you must change "MODE=NORMAL to MODE=KBUS"! Than you can connect the OBD interface direct to LCM, pin 7 to K-bus pin in LCM. But how to edit the VIN and the odo i have no idea. RE: E39: LCM change vin tool32 ? - Fx82 - 01-04-2018 I'm using a can bridge interface. Is obd.ini for a specific interface? RE: E39: LCM change vin tool32 ? - Fx82 - 02-04-2018 Is it possible to program the eeprom of the lcm? I do have a R270. RE: E39: LCM change vin tool32 ? - VALLE - 06-04-2018 software BMW Scanner. |