![]() |
Flashing with ICOM Next and Esys noob questions - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Flashing with ICOM Next and Esys noob questions (/showthread.php?tid=34334) |
Flashing with ICOM Next and Esys noob questions - maxwell4321 - 01-04-2018 I have ICOM Next that I use for coding etc but I now find myself needing to full flash because of certain retrofit and because of previous retrofits I do not want to use ISTA+ so am planning to use Esys. As I understand it I need to setup as follows. PC>DCHP Router>Icom>Car and connect PSU to car Reserve ICOM with iTool Radar Now at this point because ZGW will be included - which connection do I select in Esys, do I use normal ICOM or by gateway URL ? ![]() Generate TAL Lock ASCM module for airbags with External transmitter Execute TAL Pray hard. Is this correct ? RE: Flashing with ICOM Next and Esys noob questions - Enabled - 03-04-2018 I never lock my ICOM. I simply connect it directly to laptop, unless flashing NBT/Kombi, then you need DHCP. I used ICOM connection. |