+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: How to setup Ista+ without programming (/showthread.php?tid=34662)
How to setup Ista+ without programming - Bimmer540 - 10-04-2018
I use Ista+ 4.10.30
I know that the registry must be like this:
"BMW.Rheingold.Programming.ExpertMode"="False"
"BMW.Rheingold.Programming.Enabled"="False"
"BMW.Rheingold.Programming.PsdzDataPath"="..\\..\\PSdZ\\data_swi"
But which files/maps must be located in map PSdZ?
Now I have:
bin
binx64
host
hostx64
And when I use Enet cable I get message after reading all ECU's
"Programming is not possible"
If I click this message away I can just continue.
How can I get this message away?
RE: How to setup Ista+ without programming - Stromag - 10-04-2018
(10-04-2018, 15:18 PM)snypertje Wrote: I use Ista+ 4.10.30
I know that the registry must be like this:
"BMW.Rheingold.Programming.ExpertMode"="False"
"BMW.Rheingold.Programming.Enabled"="False"
"BMW.Rheingold.Programming.PsdzDataPath"="..\\..\\PSdZ\\data_swi"
But which files/maps must be located in map PSdZ?
Now I have:
bin
binx64
host
hostx64
And when I use Enet cable I get message after reading all ECU's
"Programming is not possible"
If I click this message away I can just continue.
How can I get this message away?
Try it with the BLP data so the folder "data" under C / Rheingold / PSdZ / data ..
Of course, in the Reg also specify that the data is available but still as you have made everything on "false" ..
RE: How to setup Ista+ without programming - Bimmer540 - 10-04-2018
So when I put "data" under C / Rheingold / PSdZ / data I must set registry on True?
RE: How to setup Ista+ without programming - Stromag - 10-04-2018
(10-04-2018, 15:50 PM)snypertje Wrote: So when I put "data" under C / Rheingold / PSdZ / data I must set registry on True?
No, you unpack the BLP under C / Rheingold / PSdZ / and you get the folder "data" ..
So C / Rheingold / PSdZ / data ..
Reg:
"Product Version" = "4.10.30.15635"
"Main Product Version" = "4.10"
"Data version" = "10/04/31"
"DataVersion_en-GB" "04/10/31"
"Logistic Base Version" "10/04/30"
"SWIData" = "04/10/30"
"BMW.Rheingold.Programming.ExpertMode" "True"
"BMW.Rheingold.Programming.Enabled" = "True"
"BMW.Rheingold.Programming.PsdzDataPath" = ".. \\ .. \\ .. \\ \\ PSdZ data_swi"
Report if your problem still occurs ..
RE: How to setup Ista+ without programming - Bimmer540 - 10-04-2018
(10-04-2018, 15:55 PM)Stromag Wrote:(10-04-2018, 15:50 PM)snypertje Wrote: So when I put "data" under C / Rheingold / PSdZ / data I must set registry on True?
No, you unpack the BLP under C / Rheingold / PSdZ / and you get the folder "data" ..
So C / Rheingold / PSdZ / data ..
Reg:
"Product Version" = "4.10.30.15635"
"Main Product Version" = "4.10"
"Data version" = "10/04/31"
"DataVersion_en-GB" "04/10/31"
"Logistic Base Version" "10/04/30"
"SWIData" = "04/10/30"
"BMW.Rheingold.Programming.ExpertMode" "True"
"BMW.Rheingold.Programming.Enabled" = "True"
"BMW.Rheingold.Programming.PsdzDataPath" = ".. \\ .. \\ .. \\ \\ PSdZ data_swi"
Report if your problem still occurs ..
Still the same error!
RE: How to setup Ista+ without programming - ferrum - 10-04-2018
create empty folders
С:\Rheingold\PSdZ\data
С:\Rheingold\PSdZ\data_swi
RE: How to setup Ista+ without programming - Bimmer540 - 10-04-2018
(10-04-2018, 17:53 PM)ferrum Wrote: create empty folders
С:\Rheingold\PSdZ\data
С:\Rheingold\PSdZ\data_swi
And then registry like this?:
"Product Version" = "4.10.30.15635"
"Main Product Version" = "4.10"
"Data version" = "4.10.31"
"DataVersion_en-GB" "4.10.31"
"Logistic Base Version" "4.10.30"
"SWIData" = "4.10.30"
"BMW.Rheingold.Programming.ExpertMode" "True"
"BMW.Rheingold.Programming.Enabled" = "True"
"BMW.Rheingold.Programming.PsdzDataPath" = ".. \\ .. \\ .. \\ \\ PSdZ data_swi"
RE: How to setup Ista+ without programming - danyro - 10-04-2018
working registry:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup]
[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI]
[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\ISTA]
"DataVersion"="4.10.31"
"DataVersion_en-GB"="4.10.31"
"ProductVersion"="4.10.30.15635"
"MainProductVersion"="4.10"
"InstallLocation"="C:\\Rheingold"
"LogisticBaseVersion"="4.10.30"
"SWIData"="4.10.30"
[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\Rheingold]
"BMW.Rheingold.Programming.Enabled"="True"
"BMW.Rheingold.Programming.PsdzDataPath"="..\\..\\..\\PSdZ\\data_swi"
"BMW.Rheingold.Programming.ExpertMode"="True"
Rheingold location
Directory of c:\Rheingold\PSdZ
06-Apr-18 22:13 <DIR> .
06-Apr-18 22:13 <DIR> ..
29-Mar-18 19:35 <DIR> bin
29-Mar-18 19:35 <DIR> binx64
06-Apr-18 22:13 <DIR> data
16-Mar-18 09:25 <DIR> data_swi
29-Mar-18 19:35 <DIR> host
29-Mar-18 19:35 <DIR> hostx64
FULL SW
Directory of c:\Rheingold\PSdZ\data_swi
16-Mar-18 09:25 <DIR> .
16-Mar-18 09:25 <DIR> ..
16-Mar-18 09:52 <DIR> psdzdata
Lite SW
Directory of c:\Rheingold\PSdZ\data
06-Apr-18 22:13 <DIR> .
06-Apr-18 22:13 <DIR> ..
06-Apr-18 22:13 <DIR> psdzdata
RE: How to setup Ista+ without programming - larshutten - 10-04-2018
Did you also try to change the values in istagui.config? If I am right the same values from reg keys are also there.
RE: How to setup Ista+ without programming - Stromag - 10-04-2018
The error message when reading the error memory with Fxx / Gxx is that no SDP data has been installed.
If it is resolved how not to get the error message when running the error memory WITHOUT installed SDP data / BLP data, a manual would be very good.
Very often the topic comes up and people have questions or the mentioned mistake.