FRM dead - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: FRM dead (/showthread.php?tid=35307) |
FRM dead - Patrick11021979 - 02-05-2018 Can somebody help to rescue a dead FRM3... I have xprog 5.0.... So i can read the eprom, which file do you need to restore the eprom? This is the partnumber: 61359224592 e87 Basis Thanks in advance RE: FRM dead - blax123 - 02-05-2018 You need to read the D-Flash, then Convert the D-Flash to Eeprom, write the newly created Eeprom to the FRM3. If you need Good Eeprom Dump, i have one with the same part number, but then you have to recode it with NCS RE: FRM dead - Patrick11021979 - 02-05-2018 (02-05-2018, 12:32 PM)blax123 Wrote: You need to read the D-Flash, then Convert the D-Flash to Eeprom, write the newly created Eeprom to the FRM3. Reading d-flash is no problem, but how do you convert ? RE: FRM dead - tigre - 02-05-2018 post d-flash and someone will do it RE: FRM dead - Issam.khaled - 02-05-2018 I can do it for you team viewer RE: FRM dead - gpdriver - 02-05-2018 software for extract eee... RE: FRM dead - duythanh - 08-05-2018 FILE FRM E90 OK RE: FRM dead - ocostel - 08-05-2018 (07-05-2018, 20:08 PM)Patrick11021979 Wrote:(02-05-2018, 18:59 PM)gpdriver Wrote: software for extract eee... This is free website which do the job |