+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW E60 2004 M-ASK to CCC Retrofit (/showthread.php?tid=37874)
BMW E60 2004 M-ASK to CCC Retrofit - atomantmk - 30-07-2018
I have change M-ASK with CCC, VO $606 removed und added $609, coded all 5 modules related to CCC but iDrive controller don't work and steering wheel buttons for radio station searching don't work too.
Do I must to change the controller or to add new VO like +ZBEP and what to do with buttons on steering wheel to work?
In CAPPL ZBE I have coded to LOW_WITH_SLOPES but no changes on controller!
RE: BMW E60 2004 M-ASK to CCC Retrofit - Thorsten - 30-07-2018
Hi,
Before adding the HO word, what was coding value of ZBE?
Change value to slow...
Thorsten
RE: BMW E60 2004 M-ASK to CCC Retrofit - atomantmk - 30-07-2018
(30-07-2018, 20:59 PM)Thorsten Wrote: Hi,
Before adding the HO word, what was coding value of ZBE?
Change value to slow...
Thorsten
Coding was set on HIGH
RE: BMW E60 2004 M-ASK to CCC Retrofit - Thorsten - 30-07-2018
Ok, then change only to slow and not to slow_with...
Thorsten
RE: BMW E60 2004 M-ASK to CCC Retrofit - atomantmk - 30-07-2018
I have tried with slow too but no success.
RE: BMW E60 2004 M-ASK to CCC Retrofit - bmwcoder75 - 30-07-2018
If your ccc is from 2007+, from memory you will need to change zbe too...or flash gw...
RE: BMW E60 2004 M-ASK to CCC Retrofit - atomantmk - 30-07-2018
(30-07-2018, 21:15 PM)bmwcoder75 Wrote: If your ccc is from 2007+, from memory you will need to change zbe too...or flash gw...Yes, CCC is from the latest...
And what about buttons on steering wheel?
RE: BMW E60 2004 M-ASK to CCC Retrofit - Thorsten - 30-07-2018
Is it a LCI CCC?
First LCI CCC has had slow controller, from 3/07,
Then if I remember me right, 9/08, the CCC was available with ZBE from CIC.
To get it working, GW Flash was needed.
So flash gateway to other ZUSB and code to low.
Thorsten
RE: BMW E60 2004 M-ASK to CCC Retrofit - atomantmk - 30-07-2018
I have forgotten to write that the buttons for saving station on Headunit don't work too, what cause or what could be the problem?
RE: BMW E60 2004 M-ASK to CCC Retrofit - Thorsten - 30-07-2018
Coding with old time criteria is the problem.
Coding is anything with FB...
Thorsten