+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: zed bull mini smart rj comms port add (/showthread.php?tid=42500)
zed bull mini smart rj comms port add - pillsburry - 19-11-2018
hi all dose any body know if posibule to just solder in the rj coms port into the mini smart zed bull i beleave the solder pads are there but do you need add anything else to use the port thanks
the port is for the add on moduals for 4d cklone and stuff thanks
RE: zed bull mini smart rj comms port add - strikeforce - 19-11-2018
Once seen a video about this on YouTube, was even planning to do same but gave up the idea. If I remember correctly you need to add some missing components on the board, resistors/capacitors.