E65 LM2 DRL with Angel Eyes - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: E65 LM2 DRL with Angel Eyes (/showthread.php?tid=43822) |
E65 LM2 DRL with Angel Eyes - Kentener - 16-12-2018 Hello, have installed a LM2 in an E65 from 2002. Pin 17 --> 60, new connector housing donated, written i-level, FA written and the part coded, as far as everything works perfectly. But then I wanted to code TFL via the stand-light rings. I coded: VERHALTEN_DRL_TFL_33 tfl_s UNP_TAGFAHRLICHT_ECE_CKM active PWM_FL_FKT_DRL_33 wert_01 DRL_TFL_TFL_33 active PWM_PIN_11_63_33 wert_05 It also works right after encoding, so the rings light up when the light switch is off. But if you turn off the ignition, wait a bit, turn on ignition, they are dark again. Does anyone have an idea what I still have to encode ??? Best regards, Kentener RE: E65 LM2 DRL with Angel Eyes - AutoExe3219 - 16-12-2018 DEF_TAGFAHRLICHT_ECE_CKM -->Aktiv RE: E65 LM2 DRL with Angel Eyes - Kentener - 16-12-2018 Thank you very much! I will try it in the next days... RE: E65 LM2 DRL with Angel Eyes - inspi1981 - 16-12-2018 AE are not usable for DRL because of low brightness RE: E65 LM2 DRL with Angel Eyes - Kentener - 16-12-2018 (16-12-2018, 19:00 PM)inspi1981 Wrote: AE are not usable for DRL because of low brightness The colleague has already rebuilt on LED. That's alright... RE: E65 LM2 DRL with Angel Eyes - Kentener - 22-12-2018 Well, I got it working now. The parameter "DEF_TAGFAHRLICHT_ECE_CKM -> Active" was not enough, you had to do the following: TAGFAHRLICHT_ECE aktiv TAGFAHRLICHT_ECE_1 aktiv TAGFAHRLICHT_ECE_2 aktiv TAGFAHRLICHT_ECE_3 aktiv Now it works the way it should. |