+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Convert CIC Japan to Europe? (/showthread.php?tid=44323)
Convert CIC Japan to Europe? - scorpium59 - 28-12-2018
Hi
I spent a vehicle from Japan to Europe, no problem at this level but relating to navigation etc, is it possible?
Is it enough just to flash the cic and put a new image on the hard drive?
Thanks
RE: Convert CIC Japan to Europe? - willisodhiambo - 28-12-2018
Wont work. Hardware software incompatibility.
RE: Convert CIC Japan to Europe? - scorpium59 - 28-12-2018
Some have apparently succeeded from Japan to New Zealand:
I did successfully, need to do the following:
1. VO-code: [852 instead of 853] and [807 instead of 810] for AU/NZ market (this also automatically converts radio frequencies)
2. Flash HU_CIC using E-Sys (check HW-IDs from SVTactual after SVT Target calculation)
3. Replace Japanese HDD with a ECE image (google,image files available online)
4. Use SWTPatcher-v2 to activate FSCs
5. Use BMW-FSC-Generator_1_0_1_0 for map update code
6. Load 2018 AU/NZ Premium maps
People are used to open topics but never finish them so it's painful. But obviously fesable seen this post:
https://cartechnology.co.uk/showthread.php?tid=30232&page=2&highlight=japan