IAW 6LPB1.02 VIRGIN NEEDED - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: IAW 6LPB1.02 VIRGIN NEEDED (/showthread.php?tid=44568) |
IAW 6LPB1.02 VIRGIN NEEDED - fadyeid - 04-01-2019 happy new year for all of you i have a car peugeot 407 changed from hdi to petrol i have problem with accellerator pedal i need virigin file to write to ecu again as my old one is bad RE: IAW 6LPB1.02 VIRGIN NEEDED - zmann - 04-01-2019 Try this... And may report (as it's not my work, a bit busy to make from yours now), to see if you need another one! ps. if I'm not wrong, the pedal of HDi and gasoline are different type, did you check it for sure? RE: IAW 6LPB1.02 VIRGIN NEEDED - Le-Mans - 05-01-2019 Here Virgin, Pin code from ECU: W0CL pass in pm RE: IAW 6LPB1.02 VIRGIN NEEDED - fadyeid - 05-01-2019 (04-01-2019, 13:31 PM)zmann Wrote: Try this... hi zaman thank u first for your help , for pedal what you mean by different types now car was 1.6hdi and all we have done changed engine with its wiring with fuse box (05-01-2019, 13:13 PM)Le-Mans Wrote: Here Virgin, hi friend please send me the pass pm thanks RE: IAW 6LPB1.02 VIRGIN NEEDED - fadyeid - 06-01-2019 the virgin files are ok and i addedd keys to bsi but no start i need another file for ecu as maybe my file is bad please RE: IAW 6LPB1.02 VIRGIN NEEDED - mefistofilos - 06-01-2019 Did you match ECU to BSI? If not, I'm not surprised it doesn't work. What software are you using to code and match BSI and ECU? RE: IAW 6LPB1.02 VIRGIN NEEDED - fadyeid - 07-01-2019 (06-01-2019, 17:57 PM)mefistofilos Wrote: Did you match ECU to BSI? If not, I'm not surprised it doesn't work. What software are you using to code and match BSI and ECU? yes i matched them and added keys by pp2000 when i try to test accellator pedal give error impossible to test !! tried another 2 pedal same error help pls RE: IAW 6LPB1.02 VIRGIN NEEDED - mefistofilos - 07-01-2019 What wiring exactly did you change? What sort of engine is it? Type of throttle body? Did you change as well accelerator pedal to the right one or left that one from hdi engine? RE: IAW 6LPB1.02 VIRGIN NEEDED - fadyeid - 10-01-2019 (07-01-2019, 15:12 PM)mefistofilos Wrote: What wiring exactly did you change? What sort of engine is it? Type of throttle body? Did you change as well accelerator pedal to the right one or left that one from hdi engine? the engine is RFN 2.0 16V THE PEDAL SENSOR IS THE SAME FOR HDI I DIDNT CHANGE , THE WIRINGS I CHANGED ARE THE ENGINE WIRINGS TO THE FUSE BOX |