2010 bmw F01 coding help - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: 2010 bmw F01 coding help (/showthread.php?tid=45578) |
2010 bmw F01 coding help - Impac - 25-01-2019 Ok guys here is the situation got a 2010 bmw F01 750 headlights where modified with LED angel eyes, now the car has Adaptive Headlight malfunction and AngelEyes/parking lights error is it possible to FDL code these error lights out ? And if so what are the parameters ? Thank you RE: 2010 bmw F01 coding help - jamam5 - 25-01-2019 Hello mate , in order to make led headlights work you will need to replace FRM module and you need to add wires from FRM to headlights , only after that you can code everything to make it work properly RE: 2010 bmw F01 coding help - Impac - 25-01-2019 Headlight were NOT replaced they were modified original AngelEyes were taken out and aftermarket rings were installed and now there is Adaptive Headlight error and angeleyes/parking lights errors for both so need to disable them RE: 2010 bmw F01 coding help - jamam5 - 25-01-2019 ooo sorry. now understand . but if you did just rings why you have adaptive headlight mulfunction ? RE: 2010 bmw F01 coding help - Impac - 25-01-2019 I have it all, i just need the lines for FDL coding i can do it my self RE: 2010 bmw F01 coding help - jamam5 - 25-01-2019 (25-01-2019, 22:33 PM)Impac Wrote: I have it all, i just need the lines for FDL coding i can do it my self then read coding from frm module and send me . i will tell which parametrs to change . for sure you looking for cold and warm checking , but i dont remember type RE: 2010 bmw F01 coding help - Impac - 25-01-2019 Its not only for cold and warm checking its also for adaptive headlight error i wont have the car till end off next week or next weekend just trying to figure out the parameters before i get the car RE: 2010 bmw F01 coding help - jamam5 - 25-01-2019 read post #4 ........ RE: 2010 bmw F01 coding help - Impac - 25-01-2019 The error was there allready for adaptive headlights malfunction, i can remove vo and code but car is heavily modified lots of custom coding thats why i wanted to know if its possible to also disable adaptive headlight malfunction error via FDL coding just like its possible with E series. |