Clip 185 error - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Renault - Dacia - Nissan - Infiniti (https://cartechnology.co.uk/forumdisplay.php?fid=57) +---- Thread: Clip 185 error (/showthread.php?tid=46982) |
Clip 185 error - flavio69 - 21-02-2019 Hi guys, I've installed successfully clip 185,it opens ok,but unfortunately don't recognize RLT interface,I change that .dll file (well known from clip 178),and at last it's giving "fatal error",and that's all.....so my guess is something wrong with that .dll.If anybody knows something about it...I'm all ears.... RE: Clip 185 error - ohayyam - 21-02-2019 where is the clip 185 download link ? RE: Clip 185 error - flavio69 - 21-02-2019 only TLD...and upgraded RE: Clip 185 error - admiral - 21-02-2019 (21-02-2019, 06:13 AM)flavio69 Wrote: Hi guys, internet connected or not ???? RE: Clip 185 error - flavio69 - 21-02-2019 does not matter....I manage to restore that dll,and clip opens again ok....but doen't recognize the RLT interface,my guess is I need another .dll,like the former one dedicated to this version of clip and to be able to recognize RLT RE: Clip 185 error - admiral - 21-02-2019 (21-02-2019, 07:25 AM)flavio69 Wrote: does not matter....I manage to restore that dll,and clip opens again ok....but doen't recognize the RLT interface,my guess is I need another .dll,like the former one dedicated to this version of clip and to be able to recognize RLT send me mail ,,,,i send you another file RE: Clip 185 error - cso_es - 21-02-2019 Hello, The error that appears is "CLIP Fatal Error" with the previous DLL. Is there any solution? RE: Clip 185 error - flavio69 - 21-02-2019 (21-02-2019, 08:07 AM)admiral Wrote:(21-02-2019, 07:25 AM)flavio69 Wrote: does not matter....I manage to restore that dll,and clip opens again ok....but doen't recognize the RLT interface,my guess is I need another .dll,like the former one dedicated to this version of clip and to be able to recognize RLT Hi Admiral....see my first and fifth post...I already had this file...and replace it,without succes...my guess is we need a nother dll.designed specialy for this version of clip 185,otherwise we need to buy a Alliance interface. RE: Clip 185 error - admiral - 21-02-2019 (21-02-2019, 15:41 PM)flavio69 Wrote:(21-02-2019, 08:07 AM)admiral Wrote:(21-02-2019, 07:25 AM)flavio69 Wrote: does not matter....I manage to restore that dll,and clip opens again ok....but doen't recognize the RLT interface,my guess is I need another .dll,like the former one dedicated to this version of clip and to be able to recognize RLT my friend "if you have installed a version V184,, and has worked, ,,,it's not the only problem in a file,,,, unninstall and reinstall again,,,,, when installing the drivers.plug the probe into a car with engine on,,,,the 12 volt voltage must be in order RE: Clip 185 error - flavio69 - 22-02-2019 After succesfully installed clip 185,I connected my RLT interface to my car,and received a message""drivers installed successfully",I had two red lamps,and two green lamps on on RLT,I tried in all my 4 usb ports...the same issue.IT GAVE ME A MESSEGE REGARDING OF NOT RECOGNIZE THE INTERFACE,AND TRY TO DISCONNECT=CONECT IN 15 SEC,BLA,BLA.my guess the smart guys from Bosch Automotive Service Solutions fucked us,with this new version of Clip. |