Digiprog 3 udate 4.88 for sn 590C8F0E0000 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: Digiprog 3 udate 4.88 for sn 590C8F0E0000 (/showthread.php?tid=4902) |
RE: Digiprog 3 udate 4.88 for sn 590C8F0E0000 - darek_naprawa - 24-06-2014 (24-06-2014, 19:13 PM)alekseyb Wrote:Nonsense you write. How do you even like sn 590C8F0E0000 save memory on the programmer it will not work because this update is for another sn.(24-06-2014, 17:28 PM)darek_naprawa Wrote: No matter if Yanhua. If you agree sn this update worksYes, first i used your checksum, and got blue screen, after recovering in programmer, i wrote the dumps from first post, its working, tested on some cars RE: Digiprog 3 udate 4.88 for sn 590C8F0E0000 - OMERTA - 24-06-2014 Hi Guys please dont fight , keep it nice I have pay for this update and the seller ( who i trust ) give me the warranty that this is sn:590C8F0E0000 so thats it Other thing , i cant make connection with my device dit some one have a solution for me , i dit try win7 and win xp RE: Digiprog 3 udate 4.88 for sn 590C8F0E0000 - jacm3 - 24-06-2014 (24-06-2014, 21:21 PM)OMERTA Wrote: Hi You need select "PC TERM" on digiprog options, if you choose this option and not connect with your computer, open your digiprog and check if have the chip FTDI RE: Digiprog 3 udate 4.88 for sn 590C8F0E0000 - OMERTA - 25-06-2014 Hi jacm3 I look at dp and i dont have ftdi chip, is there a other way to update Thanks RE: Digiprog 3 udate 4.88 for sn 590C8F0E0000 - darek_naprawa - 25-06-2014 (25-06-2014, 19:03 PM)OMERTA Wrote: Hi jacm3Save memory on 28F800 directly on the programmer. RE: Digiprog 3 udate 4.88 for sn 590C8F0E0000 - OMERTA - 25-06-2014 Hi Darek, thanks for repay Can you little explain more , thats total new for me RE: Digiprog 3 udate 4.88 for sn 590C8F0E0000 - darek_naprawa - 25-06-2014 You need desoldering memory and program digi1 and DIGI2, programmer serial memory. Maybe willem programmer or any which supports this type of memory. RE: Digiprog 3 udate 4.88 for sn 590C8F0E0000 - tricki - 27-06-2014 Hi works great for me no problem at all just follow the instruction// RE: Digiprog 3 udate 4.88 for sn 590C8F0E0000 - Fraz - 01-07-2014 Just to let you know I have the same serial number on my Digiprog 3 which is a non Yanhua clone and this update has worked fine. Just follow the update instructions. Many Thanks Omerta RE: Digiprog 3 udate 4.88 for sn 590C8F0E0000 - rc.if - 04-07-2014 Good! Blue screen. I worked through TL866...My device works after kickback. |