Help damaged bsi on peugeot 307sw - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Help damaged bsi on peugeot 307sw (/showthread.php?tid=4975) Pages:
1
2
|
Help damaged bsi on peugeot 307sw - daiyan - 25-06-2014 Helleo members, i hope somebody can help me, my bsi on peugeot 307sw 1.6 2004 is damaged totaly, i got a second hand bsi with same fn number but how can i get this to work with my car? can somebody program this for me? my bsi info is: FNR: 9657797580 A FNC: 9657796880 A Valeo Bsi J03-00 Ref. Ann: A12120 29/06/04 18:09 Controle: 2 5 Boot: 9.31 Cmd: 00031646160604 Puissance: 1325290604 chassis number for this car is: VF33HNFUB83756064 this info is for my origianl bsi. I have digiprog 3 but i do not know how to use it. Please help me. Best Regards Daiyan RE: Help damaged bsi on peugeot 307sw - darek_naprawa - 25-06-2014 Read memory from the old batch and upload the new order is the easiest way. RE: Help damaged bsi on peugeot 307sw - daiyan - 25-06-2014 Is it any tutorial to wich chip it is and how to do that? the bsi inside i melted i do not how it happend. any pictures of how to do? RE: Help damaged bsi on peugeot 307sw - darek_naprawa - 25-06-2014 In digiprog have a description of how podłaczyć.Odczyt memory record in digiprog and then record the second BSI. RE: Help damaged bsi on peugeot 307sw - daiyan - 25-06-2014 (25-06-2014, 19:54 PM)darek_naprawa Wrote: In digiprog have a description of how podłaczyć.Odczyt memory record in digiprog and then record the second BSI. problem is that the bsi is melted and damaged, the digiprog says plug 1 but i do not understand what is plg 1? do you have any idea? i dont think it wil help to solder on cables because many of chips felt of when the motherboard mekted but can i desolder and read the chips? i have valeo bsi wiich chip shuld i desolder? and were is it located? RE: Help damaged bsi on peugeot 307sw - McMihai - 25-06-2014 (25-06-2014, 19:35 PM)daiyan Wrote: Helleo members, i hope somebody can help me, my bsi on peugeot 307sw 1.6 2004 is damaged totaly, i got a second hand bsi with same fn number but how can i get this to work with my car? can somebody program this for me?looking EEPROM. 95160, unsolder the old one and mount it in the new bsi. If you do not find the 95160's seek 912DG128 RE: Help damaged bsi on peugeot 307sw - daiyan - 25-06-2014 Do youknnow were it is located? (25-06-2014, 20:27 PM)McMihai Wrote:(25-06-2014, 19:35 PM)daiyan Wrote: Helleo members, i hope somebody can help me, my bsi on peugeot 307sw 1.6 2004 is damaged totaly, i got a second hand bsi with same fn number but how can i get this to work with my car? can somebody program this for me?looking EEPROM. 95160, unsolder the old one and mount it in the new bsi. If you do not find the 95160's seek 912DG128 RE: Help damaged bsi on peugeot 307sw - McMihai - 25-06-2014 [quote='daiyan' pid='46998' dateline='1403728643'] Do youknnow were it is located? not know the correct location you have to open the bsi, sometimes you have to break the case, open the old carefully and you'll find it. on next so you'll know where this RE: Help damaged bsi on peugeot 307sw - daiyan - 25-06-2014 (25-06-2014, 20:50 PM)McMihai Wrote: [quote='daiyan' pid='46998' dateline='1403728643'] it is some type os black layer on chips so i cant red the numbers on them. i found the chip but when i read it with digiprog 3 eeprom obtion it just show fff on every line??? what to do?? were should the red cable on clip be on the chip? please someone???? RE: Help damaged bsi on peugeot 307sw - McMihai - 25-06-2014 I found the chip but when i read it with digiprog 3 eeprom obtion it just show fff on every line??? what to do?? were should the red cable on clip be on the chip? please someone???? [/quote] let's see Daiyan. is easier to change the eeprom from one unit to the other. than reading and writing, most of the time to do this you need desoldering eeprom fussed all by yourself, or you really want to change the Km |