+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom (/showthread.php?tid=49833)
Pages:
1
2
mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom - matiz - 20-04-2019
Hi,
I need pinout for dashboard MINI R50 for reading eeprom and change VIN number. Could somebody help me please?
Thank you very much.
RE: mini r50 dashboard 3K91D pinout - volavka - 20-04-2019
4 wires needed for read the mcu , GND 5v reset bkgd
Post Picture of backside board , i will send u the right pinout
Br. V
RE: mini r50 dashboard 3K91D pinout - matiz - 21-04-2019
Thank you very much
RE: mini r50 dashboard 3K91D pinout - volavka - 21-04-2019
(21-04-2019, 12:00 PM)matiz Wrote: Thank you very much
Use This Pinout
RE: mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom - matiz - 24-04-2019
I read dash eeprom xprog secured 3k91d, change km and vin, write dashboard and dask bricked. Display not work, control lamps in dash not work, no connection via diagnostic port, no vin, dash dead...
I read eeprom three times, always identical file. Write original eeprom, dash still brick. I read eeprom from dash and compare with first time read and file IDENTICAL.
I do not know what happened. Wrong read or wrong bypas MCU?I need eeprom and flash for mini cooper R50 and chrono paket.
Part number: 6211-6936280
HW index: 30
SW index 20
Thank you very much for eeprom and flash
RE: mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom - Vojno - 24-04-2019
Are you using original or chines xprog?
RE: mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom - matiz - 24-04-2019
Unfortunately china. CAS2 and CAS3 read and write, frm read and write but dashbord KO.
RE: mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom - volavka - 24-04-2019
No worries
some sectores in Flash area been erased while reading ..
Post Cluster sticker we will find proper flash for your cluster
Then write flash by xprog .. should work then
Br. V
RE: mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom - matiz - 24-04-2019
Thank you very very much.
RE: mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom - matiz - 29-04-2019
Could please someone help me? I really urgent need flash and eeprom for harwdware 30. thank you very much