+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: General Motors (GM) (https://cartechnology.co.uk/forumdisplay.php?fid=70)
+---- Thread: 2007 Cadilac Escalade electronic suspension question (/showthread.php?tid=50302)
2007 Cadilac Escalade electronic suspension question - koziol - 01-05-2019
Is there any way to disable warning light on dashboard ?
Module is defective
shocks already replaced to conventional .
RE: 2007 Cadilac Escalade electronic suspension question - brunofraga - 01-05-2019
(01-05-2019, 17:37 PM)koziol Wrote: Is there any way to disable warning light on dashboard ?
Module is defective
shocks already replaced to conventional .
The place where you bought your conventional kit, they didn't provide you with a relay/bypass to plug to the module connector? eBay and Amazon sell them, you can also probably get a 3.9ohm 25-watt resistor to make your own. "autoride bypass"
RE: 2007 Cadilac Escalade electronic suspension question - koziol - 01-05-2019
car came to shop with shocks already replaced
they dont have any thing to bypass that
RE: 2007 Cadilac Escalade electronic suspension question - xtac1080 - 02-05-2019
Arnott makes a bypass module that replaces the OE air ride module, but I don't think you can buy it separate from the complete conversion kit. Might want to contact them to be sure.
RE: 2007 Cadilac Escalade electronic suspension question - koziol - 02-05-2019
They cant help ,they want to sell complete kit
RE: 2007 Cadilac Escalade electronic suspension question - Autotronixx - 20-01-2022
If you just wanna disable it, pull the Neg on the battery and then pull the RTD fuse under the hood. Hook the Neg back up and you wont have any more error message.