+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: No sound on speakers after replace CCC on E60 (/showthread.php?tid=5105)
No sound on speakers after replace CCC on E60 - kaname - 02-07-2014
Hello, I'm having a bad time trying to fix my E60's radio, now I bought a CCC replacement. The old one, had a communication problem with the ASK module. I checked the part number and every detail in the new part, and they are all the same.
I installed this new CCC, but sound problems persist, I can't get any sound from the radio.
- The first thing I did after the install was change the VIN# (using NCS expert) in every module that INPA said is different, then I programmed it with WinKFP, but no luck at all. I still having no sound on the speakers.
- I started the test on the Inpa and I get some errors every time I try to trigger a speaker, the same thing is happening when I try it with Rheingold, but it say that there is no errors on the general test. Those error are shown in the pictures.
![[Image: Ha9nvhn.jpg?1]](http://i.imgur.com/Ha9nvhn.jpg?1)
![[Image: Gd8MBK7.jpg?1]](http://i.imgur.com/Gd8MBK7.jpg?1)
![[Image: wRnCWsH.png?1]](http://i.imgur.com/wRnCWsH.png?1)
![[Image: YE5OBLu.png?1]](http://i.imgur.com/YE5OBLu.png?1)
![[Image: XOymsdZ.png?1]](http://i.imgur.com/XOymsdZ.png?1)
![[Image: VoTOaJw.png?1]](http://i.imgur.com/VoTOaJw.png?1)
I hope you can help me, I dont know what else to do now..
RE: No sound on speakers after replace CCC on E60 - bawareca - 02-07-2014
I have had that problem before after replacing the amp or CCC.Disconnect the battery overnight and if that doesnt solve the problem run CCC coding and it will work.
RE: No sound on speakers after replace CCC on E60 - kaname - 02-07-2014
(02-07-2014, 13:40 PM)bawareca Wrote: I have had that problem before after replacing the amp or CCC.Disconnect the battery overnight and if that doesnt solve the problem run CCC coding and it will work.
Thanx! I'll try it today.. by the way, what do you mean about "run CCC coding"? Can I code the CCC using INPA, WinKFP or Rheingold?
RE: No sound on speakers after replace CCC on E60 - Tombo - 02-07-2014
You can code it to deflaut using ncsexpert with expert profile.
RE: No sound on speakers after replace CCC on E60 - kaname - 03-07-2014
It works.. Thank you guys..