+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Mercedes Benz - Smart (https://cartechnology.co.uk/forumdisplay.php?fid=63)
+---- Thread: eCOM ACTIA config (/showthread.php?tid=52743)
eCOM ACTIA config - Injectorcentr - 25-06-2019
Since there is little information about configuring Xentry and eCOM, I open this topic! I myself have set everything to “eat the dog” and not suffer anymore. So if I make a mistake, correct me.
Iron: eCOM Aktia, clone № 2xxxxx from here, Lenovo ThinkPad x230 Tablet i5.
Software: Xentry 07.2019, thanks,
[b]pesona [/b] took it from here.In principle, after installing Xentry SDConnect Toolkit-immediately sees the multiplexer, but since the eCOM guide is concerned with the separate installation of drivers, and they are already integrated into Xentry, I ran into a problem by doing I + ME ACTIA D-PDU API.Test:
![[Image: full_U87YLt2Q.jpg]](https://injectorcentr.ru/uploads/s/c/f/p/cfpihgcla4az/img/full_U87YLt2Q.jpg)
Comparing with the eCOM manual:
![[Image: full_7mc3ZVq2.jpg]](https://injectorcentr.ru/uploads/s/c/f/p/cfpihgcla4az/img/full_7mc3ZVq2.jpg)
Can anyone suggest further action ???
RE: eCOM ACTIA config - Injectorcentr - 27-06-2019
Kind people ! ! ! I am looking for installation files for eCOM version 2xxxxx :
"SDconnect Toolkit X.exe"
"Install XS D PDU API_V_X_X_X.exe" (x is the version number)
RE: eCOM ACTIA config - Injectorcentr - 29-06-2019
Can anyone share drivers?
RE: eCOM ACTIA config - sascha965 - 29-06-2019
Install Driver for USB to Lan Adapter can download here
RE: eCOM ACTIA config - Injectorcentr - 29-06-2019
Thank you, this USB cable driver will be useful in this topic.
But I connect eCOM via a network cable and I don’t have to use this driver.
I spread the SDConnect Toolkit version 2130
This is the server installer.
If anyone has a more recent version - please share ! Support the topic.
RE: eCOM ACTIA config - Glintweb - 29-06-2019
from version 12 2017 "eCOM" Configuration is joined to Authorization working under control from license manager parameter
you edit wrong place for make eCOM working with xentry
RE: eCOM ACTIA config - Injectorcentr - 29-06-2019
You want to say that when using Xentry starting from version 12.2017, I need a special activation key to use eCOM? You can clarify or correct me.
RE: eCOM ACTIA config - Glintweb - 29-06-2019
(29-06-2019, 20:50 PM)Injectorcentr Wrote: You want to say that when using Xentry starting from version 12.2017, I need a special activation key to use eCOM? You can clarify or correct me.
special activation key or patch
RE: eCOM ACTIA config - Injectorcentr - 29-06-2019
I activated Xentry with a long key. And corrected the file PDUAPI_I + ME_ACTIA_XS.INI.
Code:
C:\Program Files (x86)\Mercedes-Benz\Xentry\bin\PDU\SDConnect\PDUAPI_I+ME_ACTIA_XS.ini
then Go to section [eCOM PFW]
Edit value of key "Firmware" to "eCOM_SDconnect_24_Fw.zip":
Firmware=eCOM_SDconnect_24_Fw.zip
Now communication is established with the multiplexer. But not everything is so simple ... During the FIN check process, an error occurs:
Internal error java.lang.Exception: MUX check failed. Connected MUX not allowed!
at AutorenSchnittstelle/Module/FIN_PRUEFUNG/AutorenSchnittstelle/Ablauf/NODE40
in file:/C:/Program%20Files%20(x86)/Mercedes-Benz/Xentry/MB_PKW/Baureihe/166_ModulEinstieg.gmf
(test car X166.873)
I think that now the problem is in the serial number of my eCOM (2xxxxx) ...
RE: eCOM ACTIA config - Injectorcentr - 04-07-2019
Guys !!! Who is using eCOM sn: 2xxxxx please share the file:
C:\Program Files (x86)\Mercedes-Benz\Xentry\bin\PDU\SDConnect\PDUAPI_I+ME_ACTIA_XS.dll