+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: CAS4 5M48H + upa (/showthread.php?tid=54601)
CAS4 5M48H + upa - BobbySD - 04-08-2019
Im looking for connection diagram and unlock script for upa to read CAS4 MC9S12XEP100(5M48H). Does anybody have it please?
Thanks
[url=https://www.youtube.com/watch?v=ow5P-265w2w][/url]
RE: CAS4 5M48H + upa - rs@chip - 04-08-2019
(04-08-2019, 22:02 PM)BobbySD Wrote: Im looking for connection diagram and unlock script for upa to read CAS4 MC9S12XEP100(5M48H). Does anybody have it please?
Thanks
[url=https://www.youtube.com/watch?v=ow5P-265w2w][/url]
If you have new upa-S.. can simply ask developer for a script and he provide it for your serial , old upa not posible to read such mcu iven with script.. If you have xprog I can provide working pinout without lifting pins
RE: CAS4 5M48H + upa - BobbySD - 05-08-2019
Probably i have old upa. Not sure v1.3 I only need to check mileage because the car had 50k down on dash and I need to correct data in dash. As I was checking my upa support list that mcu is supported.
RE: CAS4 5M48H + upa - rs@chip - 05-08-2019
(05-08-2019, 06:56 AM)BobbySD Wrote: Probably i have old upa. Not sure v1.3 I only need to check mileage because the car had 50k down on dash and I need to correct data in dash. As I was checking my upa support list that mcu is supported.
yes xep100 mcu is supported by many programers, but not fuly locked like those in cas4 unit.. only few programers can safely handle this mcu hexprog,xep100 evo,upa-s,x-prog.. about mileage if you incrase it you can do only dash 35160 if you lowering than cas need to be reset to 0 first
RE: CAS4 5M48H + upa - BobbySD - 05-08-2019
I want to increase. So ill try only dash first. What version of xprog is ok? There is quite many if them. Also i was looking at r280/290 but there arent any reviews of those
RE: CAS4 5M48H + upa - rs@chip - 05-08-2019
(05-08-2019, 12:09 PM)BobbySD Wrote: I want to increase. So ill try only dash first. What version of xprog is ok? There is quite many if them. Also i was looking at r280/290 but there arent any reviews of those
yes r280 is also good for this yob.. especialy for eeprom erase work perfect