+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Renault - Dacia - Nissan - Infiniti (https://cartechnology.co.uk/forumdisplay.php?fid=57)
+---- Thread: Problem Derelek USB Diag 3 - DDT2000. (/showthread.php?tid=55236)
Pages:
1
2
Problem Derelek USB Diag 3 - DDT2000. - al3xand3r - 18-08-2019
Hi to everyone.
I have a derelek interface and i have a question and a problem in the same time, maybe some one have any idea about that.
I tried with different versions od DB, but every time i have the same problem, majority of ecus are not complete identified and i can't access and make any change on them.
When i try to identify manually an ecu, every time i received error 1013.
In this moment i have the complete database from 2018, and my car is from 2018, Logan X52, theoretical it's ok, but practical surprise, no.
Any idea what can be the cause of this problem ?
Thank's.
RE: Problem Derelek USB Diag 3 - DDT2000. - Renopower - 19-08-2019
Cable defect? Maybe wire defect, never see that mesage.
Try other database, with this 3.0.3 versioni have never any problem.
Only some cars he did not recognized navi
RE: Problem Derelek USB Diag 3 - DDT2000. - jure5j - 19-08-2019
I can give you a link to database 7/2019.Just to try out.Have you tried on older cars?
RE: Problem Derelek USB Diag 3 - DDT2000. - al3xand3r - 19-08-2019
(19-08-2019, 08:21 AM)Renopower Wrote: Cable defect? Maybe wire defect, never see that mesage.
Try other database, with this 3.0.3 versioni have never any problem.
Only some cars he did not recognized navi
Cable is ok, because the ddt identify derelek interface, and of all ecus, i successful to identify 2 of them. I tried with other database, but the result is the same.
I can see some errors from ecu, but nothing complete and interesting.
(19-08-2019, 14:53 PM)jure5j Wrote: I can give you a link to database 7/2019.Just to try out.Have you tried on older cars?
Thanks, but with all versions I've tried, nothing have successful.
At first i was thinking the problem was from my DB, but after i change 3-4 versions, the result was the same. Most probably are some details that I miss.
A question: it's possible to be a difference of some xml file between two database, except the new products ?
For example a cluster with the same name in two different database, are different one of other ?
I tried on old cars, Logan MCV X52 from 2014, but the same result.
RE: Problem Derelek USB Diag 3 - DDT2000. - jure5j - 20-08-2019
(19-08-2019, 22:40 PM)al3xand3r Wrote:(19-08-2019, 08:21 AM)Renopower Wrote: Cable defect? Maybe wire defect, never see that mesage.
Try other database, with this 3.0.3 versioni have never any problem.
Only some cars he did not recognized navi
Cable is ok, because the ddt identify derelek interface, and of all ecus, i successful to identify 2 of them. I tried with other database, but the result is the same.
I can see some errors from ecu, but nothing complete and interesting.
(19-08-2019, 14:53 PM)jure5j Wrote: I can give you a link to database 7/2019.Just to try out.Have you tried on older cars?
Thanks, but with all versions I've tried, nothing have successful.
At first i was thinking the problem was from my DB, but after i change 3-4 versions, the result was the same. Most probably are some details that I miss.
A question: it's possible to be a difference of some xml file between two database, except the new products ?
For example a cluster with the same name in two different database, are different one of other ?
I tried on old cars, Logan MCV X52 from 2014, but the same result.
I connected my derelek to Renault Kangoo 2018 with DDT2000 version 3.0.2.9(I believe is newer that the one you use) and database 12/2018 and had no problems with recognizing the ecus in the car.
RE: Problem Derelek USB Diag 3 - DDT2000. - al3xand3r - 21-08-2019
(20-08-2019, 18:22 PM)jure5j Wrote:
I connected my derelek to Renault Kangoo 2018 with DDT2000 version 3.0.2.9(I believe is newer that the one you use) and database 12/2018 and had no problems with recognizing the ecus in the car.
Yes, the version 3.0.2.9 is newer like mine, i use 3.0.0.3.
I didn't identify anything yet what can cause that.
I will try tomorrow with 3.0.2.9 and my data base with another notebook, it's possible the problem to be from my pc.
If the problem persist, i will write you, to send me a link with your db.
RE: Problem Derelek USB Diag 3 - DDT2000. - al3xand3r - 06-09-2019
(21-08-2019, 23:32 PM)al3xand3r Wrote:(20-08-2019, 18:22 PM)jure5j Wrote:
I connected my derelek to Renault Kangoo 2018 with DDT2000 version 3.0.2.9(I believe is newer that the one you use) and database 12/2018 and had no problems with recognizing the ecus in the car.
Yes, the version 3.0.2.9 is newer like mine, i use 3.0.0.3.
I didn't identify anything yet what can cause that.
I will try tomorrow with 3.0.2.9 and my data base with another notebook, it's possible the problem to be from my pc.
If the problem persist, i will write you, to send me a link with your db.
After more of few week, i was little out of zone, and i think i found what is the problem.
At first view my NB is the problem, i tried yesterday with another NB and its worked, I was able to identify almost all ecus.
Today i reinstalled the OS and the problem persists on that NB.
Most probably he have personality
I sent you a pm.
RE: Problem Derelek USB Diag 3 - DDT2000. - Renopower - 08-09-2019
Can someone upload the 3.0.2.9 version, cannot find it.
Many thanks
RE: Problem Derelek USB Diag 3 - DDT2000. - fantomel - 08-09-2019
As requested, go and take what you need from here: https://cartechnology.co.uk/showthread.php?tid=56134
RE: Problem Derelek USB Diag 3 - DDT2000. - stranger_inthenight - 17-10-2019
(08-09-2019, 10:55 AM)fantomel Wrote: As requested, go and take what you need from here: https://cartechnology.co.uk/showthread.php?tid=56134
Do you have ddt2000 version 4 by any chance?