99 e350 eis help - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: 99 e350 eis help (/showthread.php?tid=562) |
99 e350 eis help - autorepair - 04-11-2013 Need help on this one please!! i have a 99 e320 with ignition problem key will not turn i have used ignition switch can i just clone the used one and if so do i have to change both eproms od69j or just read and wright them then i need conections to read with xprog or is there a nother solution to my problem thanks for your time RE: 99 e350 eis help - mercis - 05-11-2013 Why cloned,maybe have you hash problem make new key with skc RE: 99 e350 eis help - autorepair - 05-11-2013 Do i just need to read mcu 1 or do i need mcu2 or both any one have solution for reading od69j with xprog m i make connections like manul said but always device is silent time out error thanks RE: 99 e350 eis help - mercis - 05-11-2013 For skc.you need only mcu1 dump |