3AA 980 654 PCB - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: 3AA 980 654 PCB (/showthread.php?tid=57232) |
3AA 980 654 PCB - mattdj - 30-09-2019 Hi guys,Someone have picture of pcb of the 3AA 980 654? Because i don't understand if camera it's connected with PCB with Flat Cable or it's welded RE: 3AA 980 654 PCB - Ferraz - 30-09-2019 Hi can share pictures if you realy need it but you can find a lot of DIY on the internet for lane assist retrofit with pictures of the pcb. The camera its connect to the pcb with a 15x0.5mm flat cable with aproxi 6cm long. RE: 3AA 980 654 PCB - mattdj - 01-10-2019 (30-09-2019, 20:31 PM)Ferraz Wrote: Hi can share pictures if you realy need it but you can find a lot of DIY on the internet for lane assist retrofit with pictures of the pcb. But flat cable it's welded o I can use this it should be this RE: 3AA 980 654 PCB - Ferraz - 01-10-2019 (01-10-2019, 07:49 AM)mattdj Wrote:(30-09-2019, 20:31 PM)Ferraz Wrote: Hi can share pictures if you realy need it but you can find a lot of DIY on the internet for lane assist retrofit with pictures of the pcb. Its not welded. You can disconect easly puling the flat cable. RE: 3AA 980 654 PCB - cristo_844 - 01-10-2019 it's no welded and don't connect the camera to the car without the flat cable installed! |