+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Solved ✔ Ford Galaxy DCM 3.5 DPF OFF (/showthread.php?tid=58065)
Ford Galaxy DCM 3.5 DPF OFF - ziomiusas - 16-10-2019
Hi guys,
Please do not judge, i am newbie in anything that comes to flashing or programming ECU.
I hope you could help me, or point me to the right direction. I want to program DPF off on:
Ford Galaxy 2013
2.0 TDCI (diesel) 140PS (103KW)
ECU: Delphi DCM 3.5
I have read ECU with Chinese Kess V2.
HW BG91-12A650-FHD
HW Ver. BG91-12A650-NE
SW BG91-14C204-FHD
SW Ver. 2911SA31070130
Spare Part BG91-12A650-FHD
Can someone program DPF off or point what software would be compatible with this ECU. This was first time i have tried to use WinOls, but looking at tutorials (Youtube) this ecu file is not even close to the one in tutorials.
Please see file/link attached:
Thanks in advance
RE: Ford Galaxy DCM 3.5 DPF OFF - nenadjoka - 16-10-2019
this is where your fil tells you how to say hello
RE: Ford Galaxy DCM 3.5 DPF OFF - ziomiusas - 16-10-2019
I will try to flash this tomorrow and update. Thanks for help !!!
RE: Ford Galaxy DCM 3.5 DPF OFF - ziomiusas - 17-10-2019
Hi all, unfortunately still not good.
The issue is, that i received car without exhaust. I have bough another exhaust with DPF, however it comes with 2 temperature sensors, originally had 3 (find out only after fitting this one).
I am always getting following fault codes:
P20E4 - EGT sensor 2/3 bank 1 - correlation fault
Is there a way to disable EGT sensors or remove fault code, as programming DPF off has not helped.
Many thanks chaps
RE: Ford Galaxy DCM 3.5 DPF OFF - nenadjoka - 17-10-2019
try and report good or not good
RE: Ford Galaxy DCM 3.5 DPF OFF - ziomiusas - 19-10-2019
Hi, still the same... i have tried to unplug sensors, no changes what so ever... i have deleted DTC's prior flashing too.
Could it be the case that it needs time to reset itself?
Thanks for any help
RE: Ford Galaxy DCM 3.5 DPF OFF - Jurebv - 21-10-2019
assuming dpf files are correct you need for DTC off for missing sensor, adress is 203ABA
Best Regards
RE: Ford Galaxy DCM 3.5 DPF OFF - ziomiusas - 22-10-2019
Hi Jurebv,
Can you please expand a bit more on this?
203ABA - is this a column/row in WinOLS? If so, which rows/colum s needs changing to new values?
Thanks
RE: Ford Galaxy DCM 3.5 DPF OFF - ziomiusas - 23-10-2019
Hi, DPF has been successfully removed from ECU. Admin can you please close Thread.
Thanks