+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Car Technology Trucks / Heavy Vehicles Forum (https://cartechnology.co.uk/forumdisplay.php?fid=22)
+--- Forum: Trucks / Heavy Vehicles Softwares (https://cartechnology.co.uk/forumdisplay.php?fid=34)
+---- Forum: General - ALL The Others (https://cartechnology.co.uk/forumdisplay.php?fid=122)
+---- Thread: Fgtech galletto 4 v54 problem (/showthread.php?tid=5900)
Fgtech galletto 4 v54 problem - GMA - 17-08-2014
I installed this software but when i socket it to the obd of a car it show error massage below. possible help pls
RE: Fgtech galletto 4 v54 problem - youssef70 - 17-08-2014
(17-08-2014, 16:29 PM)GMA Wrote: I installed this software but when i socket it to the obd of a car it show error massage below. possible help pls
1 software is not for fgtech v54 ;
2 are you trying to do mpc bdm by obd ?
3 verify that you select correct driver for suitable car
RE: Fgtech galletto 4 v54 problem - cuiuda - 17-08-2014
HI
I have connected the BDM fgtech (10 pin on PCB, EDC16c35 BMW) and the same message I have it too.
Some time ago I read / write w/o problems EDC16U1 VAG.
I have replaced the 3 ICs.
RE: Fgtech galletto 4 v54 problem - GMA - 18-08-2014
(17-08-2014, 19:42 PM)youssef70 Wrote:(17-08-2014, 16:29 PM)GMA Wrote: I installed this software but when i socket it to the obd of a car it show error massage below. possible help pls
1 software is not for fgtech v54 ;
2 are you trying to do mpc bdm by obd ?
3 verify that you select correct driver for suitable car
I DID ESLLECT THE CORRECT DRIVER WITH A SUITABLE CAR, THAT IS PEUGEOT 307 BOSCH ME7.4.5 THEN IT WILL READ ECU DATA, BUT WHEN I TRY TO READ ECU FILE IT WILL STAY LONG AND COME UP WITH THAT ERROR MASSAGE