+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ICOM P consult (/showthread.php?tid=61724)
ICOM P consult - BMWF750GS - 10-03-2022
Icom P is the manufacturer's production line modification programming equipment, I opened it and had a look, the workmanship is very good, I want to transform it into an independent ISTA version that can be used, I hope you can help me and give me some useful tips!
RE: ICOM P consult - Transauto - 10-03-2022
You should change ediabas.ini for icom P :
INTERFACE = RPLUS:ICOM_P
and use Rplus.ini with :
[ICOM_P]
REMOTEHOST = 194.194.194.43
Port = 6801
;Timeout wird bei erstem Verbindungsaufbau verwendet
TimeoutConnect = 5000
;Timeout wird ...
TimeoutReceive = 5000
;Timeout wird ...TF = TF + TR
TimeoutFunction = 5000
DisconnectOnApiEnd = 1
Ista+ set interface ediabas
RE: ICOM P consult - BMWF750GS - 10-03-2022
(10-03-2022, 06:36 AM)Transauto Wrote: You should change ediabas.ini for icom P :Is there a way to brush icOM A2 firmware into ICOM P?
INTERFACE = RPLUS:ICOM_P
and use Rplus.ini with :
[ICOM_P]
REMOTEHOST = 194.194.194.43
Port = 6801
;Timeout wird bei erstem Verbindungsaufbau verwendet
TimeoutConnect = 5000
;Timeout wird ...
TimeoutReceive = 5000
;Timeout wird ...TF = TF + TR
TimeoutFunction = 5000
DisconnectOnApiEnd = 1
Ista+ set interface ediabas
RE: ICOM P consult - Transauto - 10-03-2022
I have tried
No
Icom P works well as it is
Inpa Ista Ncs and winkfpt work perfect
RE: ICOM P consult - BMWF750GS - 11-03-2022
(10-03-2022, 16:11 PM)Transauto Wrote: I have tried
No
Icom P works well as it is
Inpa Ista Ncs and winkfpt work perfect
Thank you very much for your reply. Another question, does ICOM P have the latest firmware? How to upgrade?
RE: ICOM P consult - Transauto - 11-03-2022
For update use usb 2.0 flash with latest firmware
RE: ICOM P consult - tste1982 - 12-03-2022
is there a part number for the icom-p, and how does it compare to the other available icom?
RE: ICOM P consult - Spitfire555 - 12-03-2022
(12-03-2022, 12:22 PM)tste1982 Wrote: and how does it compare to the other available icom?
First thread, first words ..... "Icom P is the manufacturer's production line modification programming equipment" (P = production).
RE: ICOM P consult - Transauto - 12-03-2022
You can use Icom-P for diagnostic,flashing and coding all BMW by D-CAN
K-Line is not suuported
Icom -P not need use Icom radar all settings are over ediabas
RE: ICOM P consult - emaflo1978 - 13-03-2022
https://cartechnology.co.uk/showthread.php?tid=55527&page=2