(13-06-2015, 15:19 PM)mattydr67 Wrote:  Opcom basic C is a software only in German language
The all other opcom softwares are Professional versions
Ofcourse there is an Advaced version but this is other think.
If you thought about opcom 120309C that cover what you thought then the answare is not
Maybe this functions it is coveraged in newer 2014 or 2015 versions but sorry I didn't remember that I checked this
I tested a lot of Opel cars and many opcom functions but only if that need to do it. Otherwise I don't play with my customers cars
But maybe someone else with a hq clne can tell you this info.
Maybe this will be usefull for you or not in Astra H 2011 Z17DTR I could performe the DPF regeneration
The only problem was that it showed only 82% after a regeneration and using Tech2win it shows 0%
But in the rest other parameters was similar in both softwares.
Good luck

P.S. - as an advice. Try to connect to your ecu using other opel model with same ecu and same year. Maybe there are mor functions aviable
I did once similar job usin my opcom advanced version to extract car pass from a car where that function it wasn't there. Trying with same ecu for a car that it has the function aviable I was able to extract the car pass and programm a key
Try it and review

(13-06-2015, 18:09 PM)bigdene1965 Wrote:  

(13-06-2015, 15:19 PM)mattydr67 Wrote:  Opcom basic C is a software only in German language
The all other opcom softwares are Professional versions
Ofcourse there is an Advaced version but this is other think.
If you thought about opcom 120309C that cover what you thought then the answare is not
Maybe this functions it is coveraged in newer 2014 or 2015 versions but sorry I didn't remember that I checked this
I tested a lot of Opel cars and many opcom functions but only if that need to do it. Otherwise I don't play with my customers cars
But maybe someone else with a hq clne can tell you this info.
Maybe this will be usefull for you or not in Astra H 2011 Z17DTR I could performe the DPF regeneration
The only problem was that it showed only 82% after a regeneration and using Tech2win it shows 0%
But in the rest other parameters was similar in both softwares.
Good luck

P.S. - as an advice. Try to connect to your ecu using other opel model with same ecu and same year. Maybe there are mor functions aviable
I did once similar job usin my opcom advanced version to extract car pass from a car where that function it wasn't there. Trying with same ecu for a car that it has the function aviable I was able to extract the car pass and programm a key
Try it and review

I never thought of trying a different model with same ecu nice trick i'll give that a go. Thanks for that very informative.

(13-06-2015, 15:19 PM)mattydr67 Wrote:  Opcom basic C is a software only in German language
The all other opcom softwares are Professional versions
Ofcourse there is an Advaced version but this is other think.
If you thought about opcom 120309C that cover what you thought then the answare is not
Maybe this functions it is coveraged in newer 2014 or 2015 versions but sorry I didn't remember that I checked this
I tested a lot of Opel cars and many opcom functions but only if that need to do it. Otherwise I don't play with my customers cars
But maybe someone else with a hq clne can tell you this info.
Maybe this will be usefull for you or not in Astra H 2011 Z17DTR I could performe the DPF regeneration
The only problem was that it showed only 82% after a regeneration and using Tech2win it shows 0%
But in the rest other parameters was similar in both softwares.
Good luck

P.S. - as an advice. Try to connect to your ecu using other opel model with same ecu and same year. Maybe there are mor functions aviable
I did once similar job usin my opcom advanced version to extract car pass from a car where that function it wasn't there. Trying with same ecu for a car that it has the function aviable I was able to extract the car pass and programm a key
Try it and review

(14-06-2015, 17:51 PM)nox.nox Wrote:  Hi, I tried it today with VAUX-COM 120309a+131223d+Ocflash_FW1.59. I had FW 1.45 before. I flashed FW 1.59 and voila the DPF regeneration menu was there! I could start DPF regeneration!
The only problem was, that all the measure values were shown with (-). I would like to test FW 1.60. Where can I download it? I can't find it! Does anyone have a download link for me plz?

(15-06-2015, 10:08 AM)fantomel Wrote:  

(14-06-2015, 17:51 PM)nox.nox Wrote:  Hi, I tried it today with VAUX-COM 120309a+131223d+Ocflash_FW1.59. I had FW 1.45 before. I flashed FW 1.59 and voila the DPF regeneration menu was there! I could start DPF regeneration!
The only problem was, that all the measure values were shown with (-). I would like to test FW 1.60. Where can I download it? I can't find it! Does anyone have a download link for me plz?

Here you go mate to play with 1.39, 1.45, 1.47, 1.59 and 1.60.

(15-06-2015, 05:54 AM)mattydr67 Wrote:  Hi mate
Don't waist your time with this.
The database from 131223d its not match with the 120309a software license
So that (-) in the measuring live data aparameters its caused by what i told you above not about the firmware.
As an example for you. The data base from opcom 150406 b/c/d is working with opcom 131223c like a charm
The database from 150406b Ro version is not working with the 131223e Ro
Good luck

(16-06-2015, 15:56 PM)fantomel Wrote:  

(15-06-2015, 05:54 AM)mattydr67 Wrote:  Hi mate
Don't waist your time with this.
The database from 131223d its not match with the 120309a software license
So that (-) in the measuring live data aparameters its caused by what i told you above not about the firmware.
As an example for you. The data base from opcom 150406 b/c/d is working with opcom 131223c like a charm
The database from 150406b Ro version is not working with the 131223e Ro
Good luck

Since Mattydr67 was so kind to confirm that mix from 131223c with database from 150406b is ok , here is an installer made for HQ Clone just like that to test.
It includes also firmware from 1.33 to 1.60 and ocflash simple+ the one for ftdi.

P.S. Maybe user tjdg will be so kind to share with us firmware 1.64 like this will be all in a pack.