+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Opel - Vauxhall - Holden (https://cartechnology.co.uk/forumdisplay.php?fid=59)
+---- Thread: Solved ✔ REC module on bench Astra H (/showthread.php?tid=63416)
REC module on bench Astra H - miriaga4344 - 17-04-2022
Hi all
Anyone know connect pins for REC on bench
I have already CIM, IPC, ECM, UEC
Thanks
RE: REC module on bench Astra H - Arbe - 17-04-2022
In x5 (the blue) you have Can bus LOW (pin 33), Ground (46).
X6: Positive
Use GlobalTIS or TIS2000 to determine the PIN number.
RE: REC module on bench Astra H - miriaga4344 - 18-04-2022
Hi Thanks for your respond,
when find some extra time, I be test
RE: REC module on bench Astra H - miriaga4344 - 24-04-2022
Hi just tested and no communication with REC, with that x3 cable,
I test with x4 low can pin 30,31,32,33 but still nothing
You think pin 6 is ignition voltage and is another ground pin 23 should be its well?
See picture attached
Thanks
RE: REC module on bench Astra H - Arbe - 24-04-2022
(24-04-2022, 10:05 AM)miriaga4344 Wrote: Hi just tested and no communication with REC, with that x3 cable,
I test with x4 low can pin 30,31,32,33 but still nothing
You think pin 6 is ignition voltage and is another ground pin 23 should be its well?
See picture attached
Thanks
The UEC are you using, its from a NON REC Car? (UEC Codes KA, LL, LZ)
If it YES, you need a UEC for REC car. I think not compatible use a REC using a UEC from car without REC. try to complete the ignition scheme. (attached) (and enable in the program low speed CANBUS the REC, in CIM,IPC,UEC...)
My car not have REC, and i have a bench with REC.
RE: REC module on bench Astra H - miriaga4344 - 25-04-2022
Hi just need add pins
53- positive voltage
57 ignition +
and working now
Thanks for your help