+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14)
+--- Thread: MMI problem after update (/showthread.php?tid=6355)
MMI problem after update - jimylra - 08-09-2014
Hello
I have one problem with my MMI 3G HDD ( Audi A4 2010 )
Five mouths ago, i go to my Audi Dealer to update my 2010 maps to 2014 maps. But something was wrong and the MMI died. After so many discussions, Audi order a new MMI.
But unfortunately, the problems remains.
On MMI i have the 2014 maps ( 8R0 060 884 BK ) - HNav_EU_K0257_5_D1
Train Version: K0257 - Mu Software: 0187.
But after i connect my vagcom i see this:
Address 56: Radio ® Labels:
Part No SW: 4G0 035 056 H HW: 4G0 035 056
Component: Radio U STD H51 0134
Revision: AB001007 Serial number: 469FY0A7510065
Coding: 010003020100000001
Shop #: WSC 06335 000 00000
VCID: 2643101A5147002ECEF-8073
1 Fault Found:
01043 - Control Module; Incorrect Software Version
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 6
Fault Frequency: 1
Reset counter: 110
Mileage: 150034 km
Time Indication: 0
Date: 2014.05.26
Time: 21:27:13
-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794) Labels: 4E0-035-6xx-5F.clb
Part No SW: 8T1 035 666 M HW: 8T1 035 666 E
Component: H-BN-EU H52 0187
Revision: -------- Serial number: 483H%0D7781251
Coding: 010100010006A1ED01000B1E000000030001
Shop #: WSC 42256 001 1048576
VCID: 4487AA92C73BD23EF0B-8011
Subsystem 1 - Part No: 8R0 060 884 BK
Component: EUR 2014 1703
Subsystem 2 - Part No SW: 8F0 919 604 HW: 8F0 919 604
Component: DU7 High H42 0098
Subsystem 3 - Part No SW: 8T0 919 609 F HW: 8T0 919 609 F
Component: E0380 Bedient H08 0100
Subsystem 4 - Part No: 8R0 060 961 C
Component: CD-Database 3638 -------( I think something is wrong here, because it should be a different part number i think... )
My question`s are:
In Radio show 4G0 035 056 H ( ETKA inform that is for radios LOW II ) but i have MMI 3G HDD - Radio High
Audi tell me that they all the updates possible.
Can anyone help ? My car went to Audi dealer 8 times, and no solution!!!!
Thank you so much to all and i`m sorry for my English.
Best Regards.
RE: MMI problem after update - andrius - 10-09-2014
Your MMI is ok, but radio modul is not flashed correctly, you need reflash radio again, not MMI
or change radio modul have had similar problem with unfinished radio flashing fixed by new reflash of radio using SD card put to mmi
RE: MMI problem after update - jimylra - 10-09-2014
Thank you so much for your reply!!!
Can you tell me how can i do it? What firmware should i use ?
(10-09-2014, 20:46 PM)andrius Wrote: Your MMI is ok, but radio modul is not flashed correctly, you need reflash radio again, not MMI
RE: MMI problem after update - forest - 30-05-2015
But what is real problem with radio modul? just "error" when scanning with VCDS or ...?
RE: MMI problem after update - enigmacar - 30-05-2015
(30-05-2015, 05:53 AM)forest Wrote: But what is real problem with radio modul? just "error" when scanning with VCDS or ...?
use Vag Can Pro for this error
RE: MMI problem after update - titou43 - 09-06-2016
Hello
Ok I have understand it needed to reflash firmware of module 56 radio with sd card under user defined update...
But what menu must be choised in the list of update menu (9398...9469...) ?
Thanks
RE: MMI problem after update - mitica - 25-07-2016
Hi, I have same problem after update MMI 6.22.4. Car is A6 2012
fault on 5F
01043 - Control Module; Incorrect Software Version
Address 5F: Information Electr. (J794) Labels: 4E0-035-6xx-5F.clb
Part No SW: 4G0 035 670 P HW: 4G0 035 670 A
Component: H-BNT-EU H48 0939
Revision: -------- Serial number: 428L90B7535659
Coding: 050100000003E7EF4D30CB3E00000003080001000000000000
Shop #: WSC 02391 785 00200
VCID: 308AC1CF632CC39275DE45-8064
Subsystem 1 - Part No: 8R0 060 884 DF
Component: EUR 2016 2204
Subsystem 2 - Part No SW: 4G0 919 605 B HW: 4G0 919 605 B
Component: DU8 C7 SV H42 0021
Subsystem 3 - Part No SW: 4G1 919 610 C HW: 4G1 919 610 C
Component: E380 BDT C7 H11 0204
Subsystem 4 - Part No: 8R0 060 961 C
Component: CD-Database 3638
Anyone solve this problem
Also have 2 more fault in 5F but i fixed them
03623 - Invalid Secruity/Release Code ------FIXED with FSC remove script
03276 - Please Check Software Version Management -------FIXED with VCDS [5F - Information Electr.][Adaptation - 10] -> Channel 15 and use Scientific Calculator
P.S. "jennoian" Enable sending private messages
RE: MMI problem after update - Sander77 - 25-07-2016
(25-07-2016, 12:34 PM)mitica Wrote: Hi, I have same problem after update MMI 6.22.4. Car is A6 2012
fault on 5F
01043 - Control Module; Incorrect Software Version
Try "dtc method" via green menu, it may help sometimes!
RE: MMI problem after update - mitica - 25-07-2016
(25-07-2016, 13:42 PM)Sander77 Wrote:You think DTC > Control > scroll 73 > then Send test(25-07-2016, 12:34 PM)mitica Wrote: Hi, I have same problem after update MMI 6.22.4. Car is A6 2012
fault on 5F
01043 - Control Module; Incorrect Software Version
Try "dtc method" via green menu, it may help sometimes!
Tray that not help
RE: MMI problem after update - Sander77 - 25-07-2016
[/quote]
You think DTC > Control > scroll 73 > then Send test
Tray that not help
[/quote]
Yes, but was 73 the number for this error under qualified dts? If yes, no luck then.