+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Read e-niro 2020 cluster (/showthread.php?tid=66438)
Read e-niro 2020 cluster - Shadows93 - 09-07-2022
Good morning everyone,
does anyone have the connection diagram and pinout for reading a kia e-niro 2020 cluster ?
The internal MCU is the Fujitsu MB91F061BS
Thank you in advance for your answers
RE: Read e-niro 2020 cluster - al70 - 09-07-2022
This is iprog diagram, hope it helps
RE: Read e-niro 2020 cluster - Shadows93 - 09-07-2022
(09-07-2022, 10:14 AM)al70 Wrote: This is iprog diagram, hope it helps
Thanks for your return al70,
Unfortunately the connection points are not the same on the pcb of the e-niro clusters.
Do you have the iprog software that can be used without the interface?
RE: Read e-niro 2020 cluster - al70 - 09-07-2022
unfortunately it only works with interface plugged in
Here's a diagram for 067BS, sometimes diagrams are mixed up in Iprog
RE: Read e-niro 2020 cluster - Shadows93 - 09-07-2022
here are the connections made to read with VVDI prog.
I used VVDI wiring information and the component datasheet.