+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Car Technology Trucks / Heavy Vehicles Forum (https://cartechnology.co.uk/forumdisplay.php?fid=22)
+--- Forum: Trucks / Heavy Vehicles Problems & General Discussions (https://cartechnology.co.uk/forumdisplay.php?fid=32)
+--- Thread: Iveco Daily 2006r 3L (/showthread.php?tid=6775)
Iveco Daily 2006r 3L - pawcik - 26-09-2014
Hello Honourable Mechanics,
I have a problem with the car Iveco Daily 2006 years, Diesel Engine Capacity 3l.
Thus describe my problem; Fires normally, the power is so. While driving, it seems that everything is ok but until the fired and such. Commutes to the intersection and stops, then want to move on and off, goes out only when adding gas. After re-firing speed keeps equal to 800, and when I want to move again, off again, after a few times at the end of the firing starts. I had car in the various "experts" and tried to upload a new map and so on. Due to cut particulate filter. Unfortunately, after a month when he returns from "ordinary skill" again this is the same and is lit constantly "EDC". Strapped computer and checking errors, but in Delphi heavy cars are displayed without marking errors like "No 00000 Unknown error code" and the number of errors is usually 5-7. I checked the values in Delphi and curious to me the value of the accelerator pedal, as showing how gently pressed for example. 120% and when he was pressed up it showed a read error or something like that, out of range. Maybe it's the program I do not know. I turn to you for help what to do or look for something in the system or some really good skill in the art that will load a good map and will not be a problem as there is no particulate filter?
The best part is that it is sometimes the driving theme that is all too much power, and can go 150km / h and has established a muzzle .. but sometimes it just happens, usually accelerates slowly and holds 100 max. How do you have any ideas that please everyone!
Thanks for all
Pawcik