+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: K-TAG rework (/showthread.php?tid=7051)
RE: K-TAG migration to trasdata - chora - 23-09-2015
Hello
i bought ktag 6.070 and i see ksuite open and all fine .
next i save ept stock , and then updated to tradata ept.
e star trasdata software and error came up . E00015A Firmware version not valid and DLL version is v1.0.151.0
next i want to go back for ksuite change ept one more time drivers install fine , but ksuite wont see hardware. are nxp dead?
i see in other pics ID 130 .
already solved the problem , o dont copy the dlls
RE: K-TAG rework - teamtuner - 23-09-2015
(23-09-2015, 15:00 PM)chora Wrote: Hello
i bought ktag 6.070 and i see ksuite open and all fine .
next i save ept stock , and then updated to tradata ept.
e star trasdata software and error came up . E00015A Firmware version not valid and DLL version is v1.0.151.0
next i want to go back for ksuite change ept one more time drivers install fine , but ksuite wont see hardware. are nxp dead?
i see in other pics ID 130 .
already solved the problem , o dont copy the dlls
not dead...need only little help from someone who know better to do this job...
RE: K-TAG rework - cawadany - 24-12-2015
Hi to all. Between fw 5.001 and fw 6.070, the pcb is the same? Is it better to take directly the 6,070 or the 5,001 and update it?
RE: K-TAG rework - teamtuner - 24-12-2015
No differences between pcb...using your update from 5.001 to 6.070,will have your tokens for reset...but also,it can be possible from sommes bastards china guys ,to buy an 5.001 version with CRP3 protection of NXP activated...so,need other work to unlock nxp and to can write new firmware 6.070...i never finded nxp crp3 locked on the 5.001 version...but there are guys that said they finded
if you buy 6.070 version,possible that your reset tokens to not work
so,i use only 5.001...update to 6.070...and all happy
RE: K-TAG rework - cawadany - 24-12-2015
So there is the possibility to receive a 5.001 with crp3.. It's a problem....
RE: K-TAG rework - ROD-BENDERS - 24-12-2015
(24-12-2015, 17:11 PM)cawadany Wrote: So there is the possibility to receive a 5.001 with crp3.. It's a problem....Yes cheap china ktag 5.001 40 to 60 dollar often comes with crp3. Its better to buy eu i know it is much more expensive but they are 100%
Sent from my SM-N910F using Tapatalk
RE: K-TAG rework - ovi730 - 03-01-2016
Some rumors :
Anyone has any info ?
Semms that also Genius have been cloned at 5.004
Removed By volavka
Read Rules
Rule No.10: Do not Post Any links to Chinese sites
RE: K-TAG rework - teamtuner - 04-01-2016
(03-01-2016, 13:17 PM)ovi730 Wrote: Some rumors :
ReMoved!!!!!!
Anyone has any info ?
Semms that also Genius have been cloned at 5.004
pfff...another shi+...
RE: K-TAG rework - jojo1212 - 17-01-2016
My stupid china clone ktag 5.001 is crp3 locked
so i got me anew EU clone with 6.070hw
RE: K-TAG rework - ruben_17non - 05-06-2016
For sure not is needed but i want to remplace also aluminium capacitors.
but i dude:
in smd aluminium the last digit is quanty of Zero?
example:
22uf shoud 22+0zero = 220 in marking of Cap
220uf shoud 22+1zero = 221
2200uf shouf 22+2zero = 222
or i will totally wrong?
i buy 220uf 50v capacitor but i recive marked with 221
![[Image: ff4082866ef6eabfaa08d0269e147bd1.jpg]](http://uploads.tapatalk-cdn.com/20160605/ff4082866ef6eabfaa08d0269e147bd1.jpg)
will not ok for ktag
