Tl866 a read eeprom 24c02 with soic clamp (bora 2000) - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: Tl866 a read eeprom 24c02 with soic clamp (bora 2000) (/showthread.php?tid=7105) Pages:
1
2
|
Tl866 a read eeprom 24c02 with soic clamp (bora 2000) - mista - 16-05-2015 Hi everyone i need to read eeprom 24c02 with tl866 A with soic clamp can i do this because i try it but nothing (EDC15 VM+ BORA 2000). when i try to read it with soic i have ff ff ff ff everywhere. which driver can i use it with soic clamp? the clamp when i put it on eeprom is not stable do you have any solution ? thanx a lot Tl866 a read eeprom 24c02 with soic clamp (bora 2000) - B10REMAPS - 16-05-2015 Them clamps are no good. Desolder the eeprom then read it with tl866a RE: Tl866 a read eeprom 24c02 with soic clamp (bora 2000) - mista - 16-05-2015 Ok friend i will de solder please telle me which driver into thé software do you use? To sélect for eeprom 24c04? RE: Tl866 a read eeprom 24c02 with soic clamp (bora 2000) - Vlado ATM Chiptuning - 16-05-2015 Did you receive with your programmer dip8-sop8 adapter?? Tl866 a read eeprom 24c02 with soic clamp (bora 2000) - B10REMAPS - 17-05-2015 The eeprom should have a brand on it. Like a logo I can't remember it from the top of my head. But you will be able to match the logo mate RE: Tl866 a read eeprom 24c02 with soic clamp (bora 2000) - mista - 17-05-2015 Hi vlado yes i receive dip8-sop8 adapter B10 relaps thanks for thé info i will check RE: Tl866 a read eeprom 24c02 with soic clamp (bora 2000) - mista - 19-06-2015 Hi everyone i desolder the 24c04 i try to read the eeprom but nohting happens the logo is like a F someone know the name of the mark ? i try with sop 8 adaptater but nothing i need help thanx a lot Tl866 a read eeprom 24c02 with soic clamp (bora 2000) - nexus_jose - 19-06-2015 Make a photo , for you conection , do you know pin 1 ?? Enviado desde mi iPhone utilizando Tapatalk RE: Tl866 a read eeprom 24c02 with soic clamp (bora 2000) - mista - 19-06-2015 Yes i know the pin 1 normally is the bottom on one side right? yes i will try to make pictures tomorrow my problem is that i don't know which driver can i use ? my eeprom is 24c04 100% but there are many driver with 24c04 sometimes with soic8 sometimes with dspo8 something like with different mark thanx a lot for help RE: Tl866 a read eeprom 24c02 with soic clamp (bora 2000) - sv2hqx - 19-06-2015 F is for fairchild |