+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: BMW FRM3R PL2 (22) 6135 9249081 DUMP FILES (/showthread.php?tid=71271)
BMW FRM3R PL2 (22) 6135 9249081 DUMP FILES - cfocosta - 08-11-2022
Hi, Folks!
I need a good dump files to repair my BMW FRM module.
FRM3R PL2 (22)
6135 9249081-01
E87 E92 E93 XE
The lights did not work and then the windows did not up and down also.
I have the UPA Programmer 1.5 and is it possible to program this module?
How can I do this repair and what the sequence to read/write the files?
Many Thanks.
Carlos Frederico Costa
RE: BMW FRM3R PL2 (22) 6135 9249081 DUMP FILES - canisha - 08-11-2022
READ D FLASH OF FRM MODULE AND POST DUMP HERE
RE: BMW FRM3R PL2 (22) 6135 9249081 DUMP FILES - skyrimzz - 08-11-2022
(08-11-2022, 20:02 PM)cfocosta Wrote: Hi, Folks!
I need a good dump files to repair my BMW FRM module.
FRM3R PL2 (22)
6135 9249081-01
E87 E92 E93 XE
The lights did not work and then the windows did not up and down also.
I have the UPA Programmer 1.5 and is it possible to program this module?
How can I do this repair and what the sequence to read/write the files?
Many Thanks.
Carlos Frederico Costa
u have so much tutorials on internet and you tube how to connect 4 pins on back side on motherboard and then read D flash..convert it to eeprom and then write it back..second solution is with tool32..find what line is broken(50 short circuit or more) and then reset it(u also have lot of tutorials on you tube,step by step)
RE: BMW FRM3R PL2 (22) 6135 9249081 DUMP FILES - that4chanhacker - 10-11-2022
(08-11-2022, 20:12 PM)skyrimzz Wrote:(08-11-2022, 20:02 PM)cfocosta Wrote: Hi, Folks!
I need a good dump files to repair my BMW FRM module.
FRM3R PL2 (22)
6135 9249081-01
E87 E92 E93 XE
The lights did not work and then the windows did not up and down also.
I have the UPA Programmer 1.5 and is it possible to program this module?
How can I do this repair and what the sequence to read/write the files?
Many Thanks.
Carlos Frederico Costa
u have so much tutorials on internet and you tube how to connect 4 pins on back side on motherboard and then read D flash..convert it to eeprom and then write it back..second solution is with tool32..find what line is broken(50 short circuit or more) and then reset it(u also have lot of tutorials on you tube,step by step)
When Dflash is corrput FRM can not communicate on CAN so tool32 cant talk to it
this should work feel free to flash both EEP and flash be sure to backup what you can if you can prior
this is 61359241014-01 E89 E9x LED AHL FRM3 PL2