IBeat 2.1.0 Diagnostic Software for Husqvarna/Mikuni - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Car Technology Motorbikes Forums (https://cartechnology.co.uk/forumdisplay.php?fid=23) +--- Forum: Motorbikes Softwares & Workshop Manuals (https://cartechnology.co.uk/forumdisplay.php?fid=36) +---- Forum: General - Others (https://cartechnology.co.uk/forumdisplay.php?fid=139) +---- Thread: IBeat 2.1.0 Diagnostic Software for Husqvarna/Mikuni (/showthread.php?tid=7189) |
IBeat 2.1.0 Diagnostic Software for Husqvarna/Mikuni - 23Andi23 - 18-05-2015 Hi to all motorbikers fans and CarTechnology Members Here IBeat 2.1.0 Diag. Software for Husqvarna/Mikuni high-performance fuel injection system & their components for motorcycles & speciality vehicles. This should work with KKL cable. "K" Line. tested on the bench was with KeySpan USB to KKL set to COM 1 to install Installation: Run ISO image and install Choose your language Choose your COM port Connect to data link Manual inside CD Note: Husqvarna motorcycles uses an Engine Management System (EMS) and features Mikuni electronic fuel injection. Testing is required for the Keihin EMS systems. Check for the correct controller and use a schematic before any connection. The diagnostic connector for the Husqvarna is behind the headlight or under the fuel tank. The software allows for 3 fuel adjustment points. The adjustment points are low, medium & high RPM. Adaptations include: The throttle position sensor (TPS) recalibration Do this after: Ignition system reset Fault reset Throttle body cleaning Throttle body replacement Adaptation after battery disconnect Languages: English French German Italian Japanese Spanish Best Regards RE: IBeat 2.1.0 Diagnostic Software for Husqvarna/Mikuni - huskyboy - 25-10-2018 Awesome thanks.. Had trouble on window 7 but working on good old xp Again Many thanks |