+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Ista, genuine Icom next a issue (/showthread.php?tid=72282)
Ista, genuine Icom next a issue - nixte - 03-12-2022
I was working normally with 4.37.40
today I have this message
"the vehicle could not be identified successfully. check vehicle interface and 'pad active'"
I can see VIN and voltage, icom works
What's wrong?
I use OEM Icom next A connected to a router, pc to router via LAN cable.
no pc setting changed.
Can someone help me?
(May be windows 10 firewall port settings or security rule changed by windows update?)
Firewal Off, antivir off
RE: Ista, genuine Icom next a issue - isma123 - 03-12-2022
heppened to me before check TCP ip config
RE: Ista, genuine Icom next a issue - mattsheng - 03-12-2022
I also have a genuine ICOM Next A and have no issue using it with ISTA at all. I don't connect ICOM to the router and setup TCP. I use DHCP server and connect ICOM directly to my laptop. If I recall correctly, DHCP server is in @Sedoy ISTA standalone package.
If you'd like to connect ICOM to your router, I found this guide to be very helpful.
| The definitive guide for setting up a DHCP server on an external router for BMW ICOM.pdf | ||
| File Type: |
|
 |
| Downloaded: | 58 times | |
| Size: | 832.3 KB | |