i have strange problem with E60 CCC show Headunit not coded correctly - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: i have strange problem with E60 CCC show Headunit not coded correctly (/showthread.php?tid=72853) Pages:
1
2
|
i have strange problem with E60 CCC show Headunit not coded correctly - iyade46 - 19-12-2022 i have strange problem with E60 CCC show Headunit not coded correctly when i scan for faults the only fault i can find isĀ S0630 Programming abort: MOST Gateway RE: i have strange problem with E60 CCC show Headunit not coded correctly - dumitru.o - 19-12-2022 that is not CCC, that is M-ASK. you should re-program it RE: i have strange problem with E60 CCC show Headunit not coded correctly - GoNz0- - 19-12-2022 Needs programming on ICOM as for a guess someone had a bash with a DCAN cable and soft bricked it. RE: i have strange problem with E60 CCC show Headunit not coded correctly - TurboDriver - 19-12-2022 Doesn't need reprogramming. Just code it. Unit is from another car not coded for this car RE: i have strange problem with E60 CCC show Headunit not coded correctly - wjgud123 - 20-12-2022 Mask is stuck in programming mode, need to be flashed again using proper equipment (ICOM + most). Then must be coded to car. You can also try only code, and even code off compability checking using ncs expert RE: i have strange problem with E60 CCC show Headunit not coded correctly - keanu1979 - 20-12-2022 icom and adapter for most i can flash in remote try coding with ncs expert RE: i have strange problem with E60 CCC show Headunit not coded correctly - iyade46 - 20-12-2022 (19-12-2022, 15:24 PM)dumitru.o Wrote: that is not CCC, that is M-ASK. i try to reprogram but didnt success i use most connector (20-12-2022, 10:51 AM)wjgud123 Wrote: Mask is stuck in programming mode, need to be flashed again using proper equipment (ICOM + most). i did still the same (19-12-2022, 20:11 PM)GoNz0- Wrote: Needs programming on ICOM as for a guess someone had a bash with a DCAN cable and soft bricked it. what the owner say that he changed MPM module after water damaged it then the problem happen RE: i have strange problem with E60 CCC show Headunit not coded correctly - Fx82 - 20-12-2022 Did you code with ista-p or winkfp? RE: i have strange problem with E60 CCC show Headunit not coded correctly - iyade46 - 22-12-2022 (20-12-2022, 16:05 PM)Fx82 Wrote: Did you code with ista-p or winkfp? i did all the ways without any success RE: i have strange problem with E60 CCC show Headunit not coded correctly - Fx82 - 22-12-2022 Old software or latest? |