Tech2 Clone update - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Opel - Vauxhall - Holden (https://cartechnology.co.uk/forumdisplay.php?fid=59) +---- Thread: Tech2 Clone update (/showthread.php?tid=7288) |
Tech2 Clone update - betsesv - 22-05-2015 Hi all mate! Does anyone update a chna tech2 card with success? And if yes how? RE: Tech2 Clone update - domelec - 23-05-2015 Yes put card in laptop (toughbook cf29 in my case or dell d505) program card with new bin with mce put card back into tech2 and test RE: Tech2 Clone update - betsesv - 23-05-2015 Any laptop will not done it? RE: Tech2 Clone update - drovid - 24-05-2015 No, must be with pcmcia card slot and runing windows xp. RE: Tech2 Clone update - betsesv - 24-05-2015 I will try and post! With card writer update fail! RE: Tech2 Clone update - domelec - 24-05-2015 Card writer is long process i once tried it too and canceled it takes far too long i only use mce now and laptops i mentioned above older dell laptops seem to be used alot by people as they work well at reprograming the cards RE: Tech2 Clone update - betsesv - 25-05-2015 I will give it a try with my old acer aspire 1350! RE: Tech2 Clone update - liviu2004 - 25-05-2015 Vista works as well, just fine with mce. RE: Tech2 Clone update - betsesv - 26-05-2015 I have mce 3.16 ! Will this version will do the work or i need the last one 3.21? RE: Tech2 Clone update - liviu2004 - 27-05-2015 Should work fine, I have 3-16 also. |