CarTechnoloGY
Help for repair XS EVO - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56)
+---- Thread: Help for repair XS EVO (/showthread.php?tid=7332)



Help for repair XS EVO - bouizanne - 23-05-2015

Hi friends
some one can give me help for repair my XS EVO (no full chip) I need the value of the missing capacitors on this pictures , Thanks


RE: Help for repair XS EVO - carpi - 24-05-2015

(23-05-2015, 23:28 PM)bouizanne Wrote:  Hi friends
some one can give me help for repair my XS EVO (no full chip) I need the value of the missing capacitors on this pictures , Thanks

Only picture I can not de-soldering the parts to measure.
I think 100n


RE: Help for repair XS EVO - bouizanne - 24-05-2015

Hi , very thank for your answer carpi , i wait little one or two further notice , if nobody can help me i try 100nf


RE: Help for repair XS EVO - carpi - 24-05-2015

I made in-circuit measurements on board.
And thank for your thanks


Don't forget to introduce yourself
http://cartechnology.co.uk/showthread.php?tid=7


RE: Help for repair XS EVO - bouizanne - 24-05-2015

Thank very much my friend , no problem i make my introduce , i was need resubscribe after the crash of forum , i forgotten


RE: Help for repair XS EVO - bouizanne - 25-05-2015

Hi friends
i put in this rar picture of all coponents that i need value , thank by advance for your help


RE: Help for repair XS EVO - titoun - 26-05-2015

Hi,

All components that are missing on your interface, and that are replaced by capacitors on GOOD clone (by chineses); are not capacitors on ORIGINAL XS EVO .....!

Cdlt.


RE: Help for repair XS EVO - bouizanne - 26-05-2015

(26-05-2015, 08:18 AM)titoun Wrote:  Hi,

All components that are missing on your interface, and that are replaced by capacitors on GOOD clone (by chineses); are not capacitors on ORIGINAL XS EVO .....!

Cdlt.

thank you titoun can you say me what's it is ? i would like rework my xs EVO
for this time i look i need change :
1 X varistors 10V 2kA 22000pF V18ZA40P
1 X Common Mode Filters / Chokes 400ohms 100MHz 50V ZJYS51R5-2P
1 X fixed inductors 22uH 5% NLV32T-220J-PF
4 X Optocoupler 10MBd2Ch 3mA HCPL-063N-000E
3 X Speed Optocouplers 1MBd 1Ch 16mA HCPL-0500-000E
1 X quarts 4.000
2 X resistance 473
7 X condensateur 30pf=0.030nf ?????????

can you help me for this friend , fantomel say me you know good this tool , if you want i have skype , have a good day for all